A tuning fork of frequency 340 Hz resonates in the fundamental mode with an air column of length 125 cm in a cylindrical tube closed at one end. When water is slowly poured in it, the minimum height of water required for observing resonance once again is ____ cm.
(Velocity of sound in air is 340 ms–1)
A tuning fork of frequency 340 Hz resonates in the fundamental mode with an air column of length 125 cm in a cylindrical tube closed at one end. When water is slowly poured in it, the minimum height of water required for observing resonance once again is ____ cm.
(Velocity of sound in air is 340 ms–1)
Correct Answer: 50
Solution and Explanation
The correct answer is 50
Given :
\(340=\frac{n}{4×125}v\)
⇒ n = 5
So λ = 100 cm
So minimum height is
\(\frac{λ}{2}=50 \) cm
Top Questions on sound
- Equal volumes of water are added to three cylindrical jars A, B and C of the same height and radii \(r_A\), \(r_B\) and \(r_C\) respectively with \(r_A<r_B<r_C\). If you blow across the mouth of these jars, which tube will produce the shrillest note?
- Two persons A and B are standing in front of a cliff in the same line 170 m apart as shown in the diagram. Person B fires the gun and hears the echo in 3 s. Then the person A standing in front of the person B fires the gun. (The speed of sound in air is 340 m/s.)
(a) Calculate:
1. the distance of the person B from the cliff.
2. the minimum time in which B hears the gunshot fired by A.
(b) Fill in the blank. The echo is softer (less loud) than the original sound due to the decrease in __________ of the wave. (amplitude / frequency)
- (a) One end of a plastic foot ruler is held tightly at the edge of a table and the other end is plucked. Name the vibrations produced in the ruler.
(b) Now the ruler is pushed inside partially and plucked again from its free end. State with a reason whether the frequency of vibration increases or decreases.
- (a) Define natural vibrations.
(b) How is this vibration different from damped vibrations in terms of their amplitudes?
- Complete the following: Quality of sound depends on its __________.
Questions Asked in JEE Main exam
- Let $\vec{a}=2\hat{i}-\hat{j}-\hat{k}$, $\vec{b}=\hat{i}+3\hat{j}-\hat{k}$ and $\vec{c}=2\hat{i}+\hat{j}+3\hat{k}$. Let $\vec{v}$ be the vector in the plane of $\vec{a}$ and $\vec{b}$, such that the length of its projection on the vector $\vec{c}$ is $\dfrac{1}{\sqrt{14}}$. Then $|\vec{v}|$ is equal to
- JEE Main - 2026
- Vector Algebra
A substance 'X' (1.5 g) dissolved in 150 g of a solvent 'Y' (molar mass = 300 g mol$^{-1}$) led to an elevation of the boiling point by 0.5 K. The relative lowering in the vapour pressure of the solvent 'Y' is $____________ \(\times 10^{-2}\). (nearest integer)
[Given : $K_{b}$ of the solvent = 5.0 K kg mol$^{-1}$]
Assume the solution to be dilute and no association or dissociation of X takes place in solution.- JEE Main - 2026
- Solutions
- The wavelength of photon 'A' is 400 nm. The frequency of photon 'B' is \(10^{16}\,\text{s}^{-1}\). The wave number of photon 'C' is \(10^{5}\,\text{cm}^{-1}\). The correct order of energy of these photons is:
- JEE Main - 2026
- General Chemistry
- Given below are two statements: Statement I: The increasing order of boiling point of hydrogen halides is HCl<HBr<HI<HF. Statement II: The increasing order of melting point of hydrogen halides is HCl<HBr<HF<HI. In the light of the above statements, choose the correct answer from the options given below:
- JEE Main - 2026
- General Chemistry
Inductance of a coil with \(10^4\) turns is \(10\,\text{mH}\) and it is connected to a DC source of \(10\,\text{V}\) with internal resistance \(10\,\Omega\). The energy density in the inductor when the current reaches \( \left(\frac{1}{e}\right) \) of its maximum value is \[ \alpha \pi \times \frac{1}{e^2}\ \text{J m}^{-3}. \] The value of \( \alpha \) is _________.
\[ (\mu_0 = 4\pi \times 10^{-7}\ \text{TmA}^{-1}) \]- JEE Main - 2026
- Ray optics and optical instruments
Concepts Used:
Sound
Sound is a vibration that propagates the mechanical wave of displacement and pressure, through a medium can be of any matter. In other words, the sound is the thin line between Music sound and Noise.
Types of Sounds:
Sound can be divided into two types depending on its frequency. The following are:-
Infrasonic Waves:
- Infrasonic waves have a frequency lower than 20 Hz. Since it is below the human hearing range, it is inaudible to humans.
- However, several other living organisms use these waves to communicate, whales, sharks, elephants, hippopotamus, etc. these waves are also used in the scientific field, it is used to study upcoming earthquakes, volcanic eruptions, human heart rates, rock formation stages, etc.
Ultrasonic waves:
- Ultrasonic waves have a frequency higher than 20 kHz. Since it is above the human hearing range, it is inaudible to humans.
- These waves are used in the scientific field, it is used to study human heart rates, to take sonograms, navigation of directions, imaging things, uniform sample mixing, communication, testing of samples, etc.