A square grid is laid on a flat terrain and is photographed from an aerial camera. The flying height and camera parameters are assumed to be constant. The camera and lens are assumed to be perfect (i.e. free from any distortions). The image of the grid obtained from the camera is shown below. Select the CORRECT statement from the statements given below. 
The error matrix resulting from randomly selected test pixels for a classified image is given below. The Producer’s accuracy of class 1 is __________ % (rounded off to 1 decimal place).
| Reference Data | |||||
|---|---|---|---|---|---|
| Class 1 | Class 2 | Class 3 | Class 4 | ||
| Classified Data | Class 1 | 320 | 8 | 7 | 3 |
| Class 2 | 12 | 270 | 6 | 2 | |
| Class 3 | 9 | 6 | 410 | 5 | |
| Class 4 | 14 | 2 | 3 | 350 | |
The brightness values of four pixels in the input image are shown in the table below. The image is rectified using nearest neighbor intensity interpolation, and the pixel at location \( (5, 4) \) in the output image is to be filled with the value from coordinate \( (5.3, 3.7) \) in the input image. The brightness value of the pixel at location \( (5, 4) \) in the rectified output image is __________ (Answer in integer).
| Location of pixels in input image (Row, Column) | Brightness Value |
|---|---|
| (5, 3) | 9 |
| (5, 4) | 11 |
| (6, 3) | 14 |
| (6, 4) | 12 |
A CCD array element in a remote sensing sensor measures incoming radiation and its output voltage varies linearly between 0 V to 5 V. This voltage is converted to an 8-bit digital image using an analogue to digital convertor (ADC). The ADC has a linear response without bias or noise. If the output image pixel has a digital number of 100, the input voltage to the ADC would be _________ V (rounded off to 2 decimal places).}
A pair of overlapping vertical photographs were taken from a flying height of $1230~\text{m}$ above sea level with a camera having a focal length of $152.4~\text{mm}$. The distance between the consecutive exposure stations is $350~\text{m}$. The parallax bar reading of a point A on the photograph is observed as $10.96~\text{mm}$. The parallax bar constant for this setup is given as $80.71~\text{mm}$. The elevation of point A above sea level is ___________ m (Rounded off to 2 decimal places).