List of top Questions asked in CUET (PG)- 2025

The quickest method of developing lawn is
Match List-I with List-II
\[\begin{array}{|l|l|} \hline \textbf{List-I} & \textbf{List-II} \\ \hline \text{(A). Autogamy} & \text{(I). Oxalis} \\ \hline \text{(B). Cliestogamy} & \text{(II). Garden pea} \\ \hline \text{(C). Dichogamy} & \text{(III). Date palm} \\ \hline \text{(D). Allogamy} & \text{(IV). Avocado} \\ \hline \end{array}\]
Choose the correct answer from the options given below:
Rock Garden is situated in
In \(\underline{\hspace{2cm}}\) modern spinning system, the rotation of yarn arises from the rotary movement of the two drums and is generated by frictional contact at the drum surface.

Choose the correct tasks of the rotor spinning machine. 
A. Fibre separation 
B. Ordering the fibres in the strand 
C. Imparting strength by twisting 
D. Removal of neps 

On a \(\underline{\hspace{2cm}}\) machine, two or more single yarns are plied and twisted together.

The main objective of the ginning process is \(\underline{\hspace{2cm}}\).

In the drafting system of a ring frame, the break draft is applied between \(\underline{\hspace{2cm}}\)

In the twisting zone, if the rear end of the fiber is not in the nip of the delivery rollers of the ringframe, the fiber will be under no control, which causes \(\underline{\hspace{2cm}}\)

Choose the correct answer from the options given below: 
Arrange the machines of a ring spinning line in the sequence. 
A. Ring Frame 
B. Carding 
C. Speed frame 
D. Draw frame 

Which of the following methods are indirect methods for determining the maturity of cotton fibers?
A. Polarised light method
B. Causticare method
C. Differential dyeing method
D. Caustic Soda swelling method
The electrical conductivity of fiber \(\underline{\hspace{2cm}}\) on increase in moisture absorption.
In a ring bobbin, the actual yarn weight is 75 grams with count 30 tex, calculate the length of the yarn in meters.

Match the LIST-I with LIST-II.\[\begin{array}{|l|l|} \hline \textbf{LIST-I} & \textbf{LIST-II} \\ \textbf{Machine part} & \textbf{Function} \\ \hline \hline \text{A. Taker-in} & \text{I. Individualisation of fibres} \\ \hline \text{B. Cylinder} & \text{II. Takes the fibers from} \\ \hline \text{cylinder surface} \\ \hline \text{C. Flats} & \text{III. Pluck the flocks from feed} \\ \hline \text{roller} \\ \hline \text{D. Doffer} & \text{IV. Elimination of neps} \\ \hline \end{array}\]

In the fineness measurement by Sheffield micronaire instrument, the flow of air through a plug of fibers is related to \(\underline{\hspace{2cm}}\) of fiber.

The thermal insulation of clothing mainly depends on fabric \(\underline{\hspace{2cm}}\)

In the spinning process, a precisely predetermined quantity of short fibers are eliminated in \(\underline{\hspace{2cm}}\).

The strength of yarn decreases with the increase in specimen length due to more chances of the occurrence of \(\underline{\hspace{2cm}}\) places in longer specimen.

The primary functions of Spin finish are \(\underline{\hspace{2cm}}\). 
A. Lubrication of fiber surface 
B. Drawing of filaments 
C. Antistatic action 
D. Cohesion of filaments

The objective of the filament drawing process is to improve the \(\underline{\hspace{2cm}}\) of a fibre.

The periodic mass variations in yarn are mainly caused by \(\underline{\hspace{2cm}}\)

The control and reduction of short fiber content have a direct impact on \(\underline{\hspace{2cm}}\) in a yarn.

With all other parameters constant, the fabric with a low cover factor effectively transmits water vapor by a diffusion mechanism in comparison with that of fabric with a high cover factor due to \(\underline{\hspace{2cm}}\)

Match the LIST-I with LIST-II.\[\begin{array}{|l|l|} \hline \textbf{LIST-I} & \textbf{LIST-II} \\ \textbf{Machine part} & \textbf{Function} \\ \hline \hline \text{A. Taker-in} & \text{I. Individualisation of fibres} \\ \hline \text{B. Cylinder} & \text{II. Takes the fibers from} \\ \hline \text{cylinder surface} \\ \hline \text{C. Flats} & \text{III. Pluck the flocks from feed} \\ \hline \text{roller} \\ \hline \text{D. Doffer} & \text{IV. Elimination of neps} \\ \hline \end{array}\]

The outstanding features of polyamide fiber are \(\underline{\hspace{2cm}}\)
A. Good dimensional stability. 
B. High wet modulus. 
C. High resistance to alkali. 
D. Low strength and high elongation.