>
Civil Engineering
List of top Civil Engineering Questions
The slurry from a biogas plant is used as a
TS PGECET - 2026
TS PGECET
Civil Engineering
Collection of solid wastes
The maximum ruling gradient in a rolling terrain according to IRC can be
TS PGECET - 2026
TS PGECET
Civil Engineering
Highway Engineering
Greenhouse effect is considered to be due to the increased levels of
TS PGECET - 2026
TS PGECET
Civil Engineering
Air Pollution
Considering the four common air pollutants found in urban environment -- NO, SO\(_2\), Soot and O\(_3\), which one of them is the secondary pollutant?
TS PGECET - 2026
TS PGECET
Civil Engineering
Air Pollution
Under normal conditions, the percentage of BOD removal during primary treatment is about
TS PGECET - 2026
TS PGECET
Civil Engineering
Water Resources
Separation of solid wastes of different densities is done by
TS PGECET - 2026
TS PGECET
Civil Engineering
Collection of solid wastes
Heating of solid wastes in an oxygen free atmosphere is called
TS PGECET - 2026
TS PGECET
Civil Engineering
Collection of solid wastes
Which kind of light energy is effectively absorbed by \(\mathrm{CO_2}\) in the lower boundary of the Troposphere?
TS PGECET - 2026
TS PGECET
Civil Engineering
Air Pollution
The hydraulic mean radius of a circular sewer of diameter \(D\) is given by
TS PGECET - 2026
TS PGECET
Civil Engineering
Water Resources
What type of canal is aligned along the natural watershed line?
TS PGECET - 2026
TS PGECET
Civil Engineering
Irrigation
Aerobic biochemical treatment of sewage effluent is essentially a process of
TS PGECET - 2026
TS PGECET
Civil Engineering
Water Resources
Hydraulic jump is
TS PGECET - 2026
TS PGECET
Civil Engineering
Fluid Mechanics
What type of dam is constructed using the hydraulic fill method?
TS PGECET - 2026
TS PGECET
Civil Engineering
Water Resources
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
TS PGECET - 2026
TS PGECET
Civil Engineering
Irrigation
The technical term used to relate the volume of water and the area of crop it matures is
TS PGECET - 2026
TS PGECET
Civil Engineering
Irrigation
Pressure inside the casing of an impulse turbine is
TS PGECET - 2026
TS PGECET
Civil Engineering
Fluid Mechanics
The ratio of the weight of water consumed from various sources by a plant in order to produce one unit weight of plant above the root zone is called
TS PGECET - 2026
TS PGECET
Civil Engineering
Irrigation
Quick sand condition occurs when
TS PGECET - 2026
TS PGECET
Civil Engineering
Soil Mechanics
The failure of the bottom of a deep excavation in sand due to the lowering of the water level inside relative to the outside is due to the phenomenon of
TS PGECET - 2026
TS PGECET
Civil Engineering
Soil Mechanics
What is the non-dimensional number that results when the ratio of inertia force to gravity force is considered?
TS PGECET - 2026
TS PGECET
Civil Engineering
Fluid Mechanics
The type of flow, if \(\dfrac{\partial v}{\partial s}=0\), is
TS PGECET - 2026
TS PGECET
Civil Engineering
Fluid Mechanics
What is the value of the included angle between two adjacent sides of the absolute best hydraulic trapezoidal open channel?
TS PGECET - 2026
TS PGECET
Civil Engineering
Fluid Mechanics
Flow over a spillway of a dam is to be treated as
TS PGECET - 2026
TS PGECET
Civil Engineering
Fluid Mechanics
A clay deposit suffers a total settlement of \(4\,\mathrm{cm}\) with one-way drainage. With two-way drainage, it suffers a total settlement of
TS PGECET - 2026
TS PGECET
Civil Engineering
Soil Mechanics
The best method for compaction of cohesion-less soils is
TS PGECET - 2026
TS PGECET
Civil Engineering
Soil Mechanics
Prev
1
...
13
14
15
16
17
...
40
Next