List of top Textile Engineering and Fibre Science Questions

The number of amino acids in casein fibre is

Which of the following Mechanical finishings is adopted to improve the lusture of bonded fabric?

Transfer printing is an example for

A mill spinning 40° Ne carded yarn with the following fiber properties. Find the Fiber Quality Index? \( 2.5% \text{ S.L } = 28 \text{ mm} \) Uniformity ratio = 0.47 Micronaire value = 4.3 Bundle strength (g/tex) = 22.5 Maturity ratio = 0.80

Ionic dyes used in printing is not suitable for

Freundlich isotherm becomes Nernst isotherm when n is

What is the effect of Mercerization process ?

The enzyme preferred for desizing is

In case of metameric samples which one of the following will be identical?

Which of the following dyes are more prone to gas fading?

Which one of the following spinning system gives higher production rate?

Benzotriazoles is an example for

Based on the principle of yarn formation, select the odd one among the following.

Two yarns of count X each are doubled and plied. The ratio of resultant count of two ply yarn expressed in tex system and Ne system is_______. Neglect contraction due to twist.

THPC flame retardant is produced by reaction of

The surface speed of cylinder is

The winding tension at the ring frame will be highest during winding at

Which of the following Dyes are used for printing of polyester?

The number of fibres in the cross section of comber lap for best combing should be about

In the carding machine, the closest setting exists between

Which one of the following chemicals is used as reducing agent in printing?

In cotton spinning, at the ring frame, the shore hardness of front top roller is normally

Select the correct match 

Which one of the following fibres is mass coloured?

The trash content of cotton fed to the blow room is 5%. The blow room has three machines having individual cleaning efficiency of 25%, 30%, 25% respectively. Find the trash% present in the blow room lap.