Step 1: Understanding the Concept:
Polyhalogen compounds are organic compounds that contain more than one halogen atom in the molecule. Most of them are derived from methane, ethane or benzene. They are used as solvents, anaesthetics, antiseptics, fire extinguishers, refrigerants and insecticides. The common examples are dichloromethane, chloroform, iodoform, carbon tetrachloride, freons and DDT.
Step 2: Dichloromethane (methylene chloride), \(\mathrm{CH_2Cl_2}\).
It is made by the chlorination of methane in the presence of light or heat.
\[ \mathrm{CH_4 \xrightarrow[\text{light}]{Cl_2} CH_3Cl \xrightarrow[\text{light}]{Cl_2} CH_2Cl_2} \]
Uses: it is a common solvent, a paint remover and a degreasing agent, and it is used as a propellant in aerosols.
Harmful effect: its vapour affects the central nervous system and causes dizziness, headache and loss of coordination. Contact with the skin causes burning.
Step 3: Trichloromethane (chloroform), \(\mathrm{CHCl_3}\).
In the laboratory it is prepared by heating ethanol or acetone with bleaching powder (the haloform reaction). On a large scale it is obtained by the chlorination of methane.
Uses: it was used earlier as a general anaesthetic. It is a good solvent for fats, waxes, resins and iodine, and it is the starting material for the refrigerant R-22 (\(\mathrm{CHClF_2}\)).
Harmful effect: in the presence of air and light, chloroform is slowly oxidised to the poisonous gas phosgene (carbonyl chloride).
\[ \mathrm{2CHCl_3 + O_2 \xrightarrow{\text{light}} 2COCl_2 + 2HCl} \]
So chloroform is stored in dark brown bottles filled up to the brim. About 1 percent ethanol is added, which changes any phosgene formed into harmless diethyl carbonate. Chloroform vapour also damages the liver and kidneys.
Step 4: Triiodomethane (iodoform), \(\mathrm{CHI_3}\).
It is prepared by warming ethanol (or acetone) with iodine and aqueous alkali (the iodoform reaction). It is a yellow solid with a characteristic smell.
Use: it was widely used as an antiseptic for wounds. The antiseptic action is due to the free iodine it liberates, not due to iodoform itself. Because of its unpleasant smell it has now been replaced by other iodine preparations.
Step 5: Tetrachloromethane (carbon tetrachloride), \(\mathrm{CCl_4}\).
It is prepared by the chlorination of carbon disulphide in the presence of a halogen carrier such as \(\mathrm{AlCl_3}\), or by the exhaustive chlorination of methane.
\[ \mathrm{CS_2 + 3Cl_2 \xrightarrow{AlCl_3} CCl_4 + S_2Cl_2} \]
Uses: it is used in fire extinguishers (its heavy vapour covers the fire and keeps out air), as a cleaning solvent in dry cleaning, and as a raw material for making freons.
Harmful effects: it damages the liver, and long exposure can cause liver cancer. It also rises to the stratosphere and helps to destroy the ozone layer.
Step 6: Freons (chlorofluorocarbons, CFCs).
These are compounds of carbon, chlorine and fluorine, such as freon-12, \(\mathrm{CCl_2F_2}\). Freon-12 is made from carbon tetrachloride by the Swarts reaction.
\[ \mathrm{3CCl_4 + 2SbF_3 \xrightarrow{SbCl_5} 3CCl_2F_2 + 2SbCl_3} \]
Uses: they are non-toxic, non-corrosive and easily liquefied gases, so they were used as refrigerants in refrigerators and air conditioners, and as propellants in aerosol sprays.
Harmful effect: in the stratosphere, ultraviolet light breaks a freon molecule and releases chlorine free radicals. These radicals destroy ozone in a chain reaction, so the ozone layer becomes thinner. The use of CFCs has therefore been restricted.
Step 7: DDT (p,p'-dichlorodiphenyltrichloroethane).
DDT is prepared by heating chlorobenzene with chloral (trichloroacetaldehyde, \(\mathrm{CCl_3CHO}\)) in the presence of concentrated sulphuric acid.
Use: it was the first widely used synthetic insecticide. It saved many lives by killing the mosquitoes that carry malaria and the lice that carry typhus.
Harmful effect: DDT does not break down easily in nature and it dissolves in fats. So it collects in the bodies of animals along the food chain and harms fish and birds. For this reason it is banned or tightly restricted in many countries.
Final Answer:
Polyhalogen compounds contain two or more halogen atoms per molecule. Their useful members (dichloromethane, chloroform, iodoform, carbon tetrachloride, freons and DDT) serve as solvents, anaesthetics, antiseptics, fire extinguishers, refrigerants and insecticides, but most of them harm health or the environment.
\[ \boxed{\text{Polyhalogen compounds: more than one halogen atom, e.g. } \mathrm{CH_2Cl_2,\ CHCl_3,\ CHI_3,\ CCl_4,\ CCl_2F_2,\ DDT}} \]