Step 1: What dielectric materials are:
Dielectric materials are insulators. They have almost no free charges, so they do not conduct, but they get polarised when placed in an electric field.
In a non-polar dielectric (like \(\mathrm{H_2}\) or \(\mathrm{O_2}\)) the field pulls the centres of positive and negative charge apart and creates induced dipoles.
In a polar dielectric (like water) the permanent dipoles, which point randomly otherwise, line up partly along the field.
In both cases the material gets a net dipole moment along the field, and the field this produces inside the material is opposite to the applied field.
Step 2: Electric susceptibility:
The dipole moment per unit volume of the dielectric is called polarisation \(\vec{P}\).
For weak fields, \(\vec{P}\) is directly proportional to the net electric field \(\vec{E}\) inside the dielectric:
\[ \vec{P} = \varepsilon_0 \chi_e \vec{E} \]
The constant \(\chi_e\) is the electric susceptibility of the medium. It has no unit and tells how easily the medium gets polarised. For vacuum \(\chi_e = 0\).
Step 3: Relative permittivity:
If \(\varepsilon\) is the permittivity of the medium and \(\varepsilon_0\) that of free space, the relative permittivity (dielectric constant) is
\[ \varepsilon_r = \frac{\varepsilon}{\varepsilon_0} = K \]
It is also the ratio \(E_0/E\), where \(E_0\) is the field without the dielectric and \(E\) is the field with it.
Step 4: Deduce the relation between them:
Take a parallel plate capacitor with free surface charge density \(\sigma\) on its plates. Without a dielectric the field between the plates is
\[ E_0 = \frac{\sigma}{\varepsilon_0} \]
When a dielectric slab is put between the plates, its faces get bound charges of density \(\sigma_p\), with magnitude equal to the polarisation \(P\). These oppose the free charges, so the net field is
\[ E = \frac{\sigma - P}{\varepsilon_0} \quad \Rightarrow \quad \varepsilon_0 E = \sigma - \varepsilon_0 \chi_e E \]
\[ \varepsilon_0 E (1 + \chi_e) = \sigma \quad \Rightarrow \quad E = \frac{\sigma}{\varepsilon_0 (1 + \chi_e)} = \frac{E_0}{1 + \chi_e} \]
By definition \(K = E_0/E\). Comparing,
\[ K = \varepsilon_r = 1 + \chi_e \]
So \(\varepsilon = \varepsilon_0 (1 + \chi_e)\) as well.
Final Answer:
Dielectrics are polarised insulators, \(\vec{P} = \varepsilon_0 \chi_e \vec{E}\) defines the susceptibility, \(\varepsilon_r = \varepsilon/\varepsilon_0\) defines the relative permittivity, and the two are related by
\[ \boxed{\varepsilon_r = 1 + \chi_e} \]