>
Exams
>
Water Resources Engineering
>
Fluid statics
>
uniformity coefficient of a soil is
Question:
Uniformity coefficient of a soil is
CUET (PG) - 2023
CUET (PG)
Updated On:
Mar 21, 2024
Always less than 1
Always equal to 1
Equal to or less than 1
Equal to or greater than 1
Show Solution
Verified By Collegedunia
The Correct Option is
D
Solution and Explanation
The correct option is(D): Equal to or greater than 1
Download Solution in PDF
Was this answer helpful?
0
0
Top CUET PG Water Resources Engineering Questions
The chezy's coefficient 'C' is related to Darcy-Weisbach friction factor 'f' as -
CUET (PG) - 2023
Water Resources Engineering
Darcy’s Law and application
View Solution
Given below are two statements:
Statement I: The head indicated by a mercury manometer is lower than the actual value.
Statement II: The head indicated by a water manometer is lower than the actual value.
In the light of the above statements, choose the most appropriate answer from the options given below :
CUET (PG) - 2023
Water Resources Engineering
Unit hydrographs
View Solution
Given below are two statements:
Statement - I: The maximum shear stress ( q max ) for a rectangular section is 3/2 times average shear stress.
Statement - II: The maximum shear stress ( q max ) for a circular section is 4/3 times the average shear stress.
In the light of the above statements, choose the correct answer from the options given below :
CUET (PG) - 2023
Water Resources Engineering
Maximum Shear Stress Theory
View Solution
Given below are two statements:
Statement - I: Rate of change of shear force (f) at any section of a loaded beam is equal to the Rate of Loading (w) at the section i.e.
\(w=\frac{df}{dx}\)
Statement - II: Rate of change of bending moment at any section of a loaded beam represent the shear force (F) at the section is
\(f=\frac{dm}{dx}.\)
In the light of the above statements, choose the correct answer from the options given below :
CUET (PG) - 2023
Water Resources Engineering
Maximum Shear Stress Theory
View Solution
Match List I with List II
List I
List II
A.
Shear force (unit)
I.
Newton/Area
B.
Stress
II.
Newton
C.
Stain
III.
Lateral Stain / Axial Stain
D.
Poisson Ration (N)
IV.
Change in length / Actual length
Choose the correct answer from the options given below :
CUET (PG) - 2023
Water Resources Engineering
Maximum Shear Stress Theory
View Solution
View More Questions
Top CUET PG Fluid statics Questions
The flow in open channel is said to be sub-critical if the Froude member is :
CUET (PG) - 2023
Water Resources Engineering
Fluid statics
View Solution
During tillage soil particles move ahead and around the moving tool as they fail in shear. Therefore, tillage is a ______ process.
CUET (PG) - 2023
Water Resources Engineering
Fluid statics
View Solution
In a wet soil mass, air occupies one-sixth of its volume and water occupies one-third of its volume. The void ratio of the soil is
CUET (PG) - 2023
Water Resources Engineering
Fluid statics
View Solution
If the hydraulic conductivity is 0.2 meter/day and thickness of the aquifer is 1.5 meter, the transmissivity of the aquifer will be
CUET (PG) - 2023
Water Resources Engineering
Fluid statics
View Solution
Top CUET PG Questions
Given below are two statements:
Statement I
: For Plato the meaning of the word 'Justice' is basically a conception in the mind only.
Statement II
: For Plato the meaning of the word 'Justice' is fixed, mind-independently
In the light of the above statements, choose the correct answer from the options given below:
CUET (PG) - 2023
Statements and Inferences
View Solution
What is the electron count of OS6CO182-?
CUET (PG) - 2023
coordination compounds
View Solution
XeF
4
hydrolysis gives A + B, HF, and Oxygen. Find A and B
CUET (PG) - 2023
p -Block Elements
View Solution
What is more basic in pyrol and pyridine?
CUET (PG) - 2023
Amines
View Solution
Hydrolysis of Al
2
C
3
, Be
2
?
CUET (PG) - 2023
p -Block Elements
View Solution
View More Questions