Question:
Given below are two statements:
Statement - I: Rate of change of shear force (f) at any section of a loaded beam is equal to the Rate of Loading (w) at the section i.e. \(w=\frac{df}{dx}\)
Statement - II: Rate of change of bending moment at any section of a loaded beam represent the shear force (F) at the section is \(f=\frac{dm}{dx}.\)
In the light of the above statements, choose the correct answer from the options given below :
Given below are two statements:
Statement - I: Rate of change of shear force (f) at any section of a loaded beam is equal to the Rate of Loading (w) at the section i.e. \(w=\frac{df}{dx}\)
Statement - II: Rate of change of bending moment at any section of a loaded beam represent the shear force (F) at the section is \(f=\frac{dm}{dx}.\)
In the light of the above statements, choose the correct answer from the options given below :
Statement - I: Rate of change of shear force (f) at any section of a loaded beam is equal to the Rate of Loading (w) at the section i.e. \(w=\frac{df}{dx}\)
Statement - II: Rate of change of bending moment at any section of a loaded beam represent the shear force (F) at the section is \(f=\frac{dm}{dx}.\)
In the light of the above statements, choose the correct answer from the options given below :
Updated On: Mar 21, 2024
- Both Statement I and Statement II are correct.
- Both Statement I and Statement II are incorrect.
- Statement I is correct but Statement II is incorrect.
- Statement I is incorrect but Statement II is correct.
Show Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct answer is (A) : Both Statement I and Statement II are correct.
Was this answer helpful?
0
0
Top CUET PG Water Resources Engineering Questions
- The chezy's coefficient 'C' is related to Darcy-Weisbach friction factor 'f' as -
- Given below are two statements:
Statement I: The head indicated by a mercury manometer is lower than the actual value.
Statement II: The head indicated by a water manometer is lower than the actual value.
In the light of the above statements, choose the most appropriate answer from the options given below : - Given below are two statements:
Statement - I: The maximum shear stress ( q max ) for a rectangular section is 3/2 times average shear stress.
Statement - II: The maximum shear stress ( q max ) for a circular section is 4/3 times the average shear stress.
In the light of the above statements, choose the correct answer from the options given below : - Match List I with List IIChoose the correct answer from the options given below :
List I List II A. Shear force (unit) I. Newton/Area B. Stress II. Newton C. Stain III. Lateral Stain / Axial Stain D. Poisson Ration (N) IV. Change in length / Actual length - Match List I with List IIChoose the correct answer from the options given below :
List I (Precipitation) List II (Characteristics) A. Frontal Cyclonic Precipitation I. Striking of air masses with topographic barriers B. Convective Precipitation II. Horizontal air flow to low pressure area causing the air to lift C. Orographic Precipitation III. Lifting of one air mass over another D. Non-frontal cyclonic precipitation IV. Due to upward movement of warm air
View More Questions
Top CUET PG Maximum Shear Stress Theory Questions
- Given below are two statements:
Statement - I: The maximum shear stress ( q max ) for a rectangular section is 3/2 times average shear stress.
Statement - II: The maximum shear stress ( q max ) for a circular section is 4/3 times the average shear stress.
In the light of the above statements, choose the correct answer from the options given below : - Match List I with List IIChoose the correct answer from the options given below :
List I List II A. Shear force (unit) I. Newton/Area B. Stress II. Newton C. Stain III. Lateral Stain / Axial Stain D. Poisson Ration (N) IV. Change in length / Actual length - In a direct shear test, the shear strength and normal stress on a dry sand sample at failure are 0.6 kg/cm2 and 10 kg/cm2, respectively. The angle of internal friction of the sand will be nearly
- A cantilever beam of T cross-section carries uniformly distributed load. Where does the maximum magnitude of the bending stress occur?
- For the design of a cast iron member, the most appropriate theory of failure is
View More Questions
Top CUET PG Questions
- Given below are two statements:
Statement I: For Plato the meaning of the word 'Justice' is basically a conception in the mind only.
Statement II: For Plato the meaning of the word 'Justice' is fixed, mind-independently
In the light of the above statements, choose the correct answer from the options given below: - What is the electron count of OS6CO182-?
- XeF4 hydrolysis gives A + B, HF, and Oxygen. Find A and B
- What is more basic in pyrol and pyridine?
- Hydrolysis of Al2C3, Be2?
View More Questions