Question:
To have a good sound effect inside a hall
To have a good sound effect inside a hall
Show Hint
The Sabine formula, $T = \frac{0.161 V}{A}$, is used by engineers to calculate reverberation time, where $V$ is volume and $A$ is total absorption. Adjusting "A" with carpets or curtains is how the "optimum" time is achieved.
Updated On: Jul 1, 2026
- the hall should not have any sound absorbing material
- the reverberation time has to be maximum
- the reverberation time has to be zero
- the reverberation time has to be optimum
Show Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Acoustic design in halls and auditoriums focuses on controlling reverberation to ensure clarity and richness of sound.
1. What is Reverberation Time?
Reverberation time is the time taken for the sound intensity to drop by $60 \text{ dB}$ after the source has stopped.
2. Why extremes are bad:
• Too high (Maximum): Sound persists for too long, causing overlapping of syllables and making speech unintelligible (excessive echoes).
• Too low (Zero): The hall feels "dead." Sound lacks richness and fails to reach the back of the room effectively.
3. The "Optimum" Requirement: A "good sound effect" requires a balance. Speech requires shorter reverberation times ($\approx 0.5 \text{--} 1.0 \text{ s}$) for clarity, while music requires slightly longer times ($\approx 1.5 \text{--} 2.0 \text{ s}$) for a full, resonant quality. Therefore, designers aim for an
optimum time based on the hall's purpose.
2. Why extremes are bad:
• Too high (Maximum): Sound persists for too long, causing overlapping of syllables and making speech unintelligible (excessive echoes).
• Too low (Zero): The hall feels "dead." Sound lacks richness and fails to reach the back of the room effectively.
3. The "Optimum" Requirement: A "good sound effect" requires a balance. Speech requires shorter reverberation times ($\approx 0.5 \text{--} 1.0 \text{ s}$) for clarity, while music requires slightly longer times ($\approx 1.5 \text{--} 2.0 \text{ s}$) for a full, resonant quality. Therefore, designers aim for an
optimum time based on the hall's purpose.
Was this answer helpful?
0
0
Top AP ECET ME Physics Questions
- If the unit of mass is $1\text{ kg}$, the unit of length is $1\text{ m}$ and the unit of time is $1\text{ minute}$, the unit of pressure in $\text{Nm}^{-2}$ is
- $MLT^{-1}$ is the dimensional formula for
- If $|\vec{A} \times \vec{B}| = \sqrt{3} \vec{A} \cdot \vec{B}$ then the value of $|\vec{A} + \vec{B}|$ is
- Of the vectors given below, the parallel vectors are $\vec{A} = 6\hat{i} + 8\hat{j}$, $\vec{B} = 210\hat{i} + 280\hat{k}$, $\vec{C} = 5.1\hat{i} + 6.8\hat{j}$, $\vec{D} = 3.6\hat{i} + 8\hat{j} + 48\hat{k}$
- The position $x$ of a particle with respect to time '$t$' along x- axis is given by $x = 9t^2 - t^3$ where $x$ is in metres and $t$ in seconds. The position of this particle when it achieves maximum speed along the x direction is
View More Questions
Top AP ECET ME Traveling Sound Waves Questions
Top AP ECET ME Questions
- Order of the matrix $\begin{bmatrix} 1 & 6 \\ 2 & 0 \\ 7 & -1 \end{bmatrix}$ is
- If two rows (or columns) of a determinant of order 3 are identical then the value of determinant is
- Co-factor of -4 in $\begin{vmatrix} 1 & 2 & 3 \\ -4 & 3 & 6 \\ 2 & -7 & 9 \end{vmatrix}$ is
- The Matrix $\begin{bmatrix} a & h & g \\ h & b & f \\ g & f & c \end{bmatrix}$ is
- If $A = \begin{bmatrix} 0 & 0 & 1 \\ 0 & 1 & 0 \\ 1 & 0 & 0 \end{bmatrix}$ then $(A^{-1}) =$
View More Questions