Question:
The velocity of upper layer of water in a river is \(36\ kmh^{–1}\). Shearing stress between horizontal layers of water is \(10^{–3} Nm^{–2}\). Depth of the river is ______ m. (Co-efficient of viscosity of water is \(10^{–2} Pa.s\))
The velocity of upper layer of water in a river is \(36\ kmh^{–1}\). Shearing stress between horizontal layers of water is \(10^{–3} Nm^{–2}\). Depth of the river is ______ m. (Co-efficient of viscosity of water is \(10^{–2} Pa.s\))
Updated On: Jul 8, 2024
Hide Solution
Verified By Collegedunia
Correct Answer: 100
Solution and Explanation
We know that,
\(F = -ηA\frac {du}{dx}\)
\(10^{-3} = 10^{-2} \times \frac {10}{h}\)
\(h =\frac {10^{-1}}{10^{-3}}\)
\(h = 100\ m\)
So, the answer is \(100 \ m\).
Was this answer helpful?
0
0
Top Questions on Stress and Strain
- A brass wire of length $2\,\text{m}$ and radius $1\,\text{mm}$ at $27^\circ\text{C}$ is held taut between two rigid supports. Initially it was cooled to a temperature of $-43^\circ\text{C}$ creating a tension $T$ in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to $1.4T$ is ___$^\circ$C.
- JEE Main - 2026
- Physics
- Stress and Strain
- One end of a steel wire is fixed to the ceiling of an elevator moving up with an acceleration \( 2 \, \text{m/s}^2 \) and a load of 10 kg hangs from the other end. If the cross-section of the wire is \( 2 \, \text{cm}^2 \), then the longitudinal strain in the wire will be (Take \( g = 10 \, \text{m/s}^2 \) and \( Y = 2.0 \times 10^{11} \, \text{N/m}^2 \)).
- WBJEE - 2025
- Physics
- Stress and Strain
- The total energy of a satellite in a circular orbit at a distance \( (R + h) \) from the center of the Earth varies as
- KCET - 2025
- Physics
- Stress and Strain
- For smaller deformations, stress is directly proportional to the strain for any material. Then the constant of proportionality is called as its
- KEAM - 2025
- Physics
- Stress and Strain
- Young's modulus and shear modulus are applicable for:
- KEAM - 2025
- Physics
- Stress and Strain
View More Questions
Questions Asked in JEE Main exam
- Identify the correct statements: The presence of –NO\(_2\) group in benzene ring A. activates the ring towards electrophilic substitutions. B. deactivates the ring towards electrophilic substitutions. C. activates the ring towards nucleophilic substitutions. D. deactivates the ring towards nucleophilic substitutions. Choose the correct answer from the options given below:
- JEE Main - 2026
- General Chemistry
- Let $\vec{a}=2\hat{i}-\hat{j}-\hat{k}$, $\vec{b}=\hat{i}+3\hat{j}-\hat{k}$ and $\vec{c}=2\hat{i}+\hat{j}+3\hat{k}$. Let $\vec{v}$ be the vector in the plane of $\vec{a}$ and $\vec{b}$, such that the length of its projection on the vector $\vec{c}$ is $\dfrac{1}{\sqrt{14}}$. Then $|\vec{v}|$ is equal to
- JEE Main - 2026
- Vector Algebra
A substance 'X' (1.5 g) dissolved in 150 g of a solvent 'Y' (molar mass = 300 g mol$^{-1}$) led to an elevation of the boiling point by 0.5 K. The relative lowering in the vapour pressure of the solvent 'Y' is $____________ \(\times 10^{-2}\). (nearest integer)
[Given : $K_{b}$ of the solvent = 5.0 K kg mol$^{-1}$]
Assume the solution to be dilute and no association or dissociation of X takes place in solution.- JEE Main - 2026
- Solutions
- The wavelength of photon 'A' is 400 nm. The frequency of photon 'B' is \(10^{16}\,\text{s}^{-1}\). The wave number of photon 'C' is \(10^{5}\,\text{cm}^{-1}\). The correct order of energy of these photons is:
- JEE Main - 2026
- General Chemistry
- Given below are two statements: Statement I: The increasing order of boiling point of hydrogen halides is HCl<HBr<HI<HF. Statement II: The increasing order of melting point of hydrogen halides is HCl<HBr<HF<HI. In the light of the above statements, choose the correct answer from the options given below:
- JEE Main - 2026
- General Chemistry
View More Questions
Concepts Used:
Mechanical Properties of Solids
Mechanical properties of solids intricate the characteristics such as the resistance to deformation and their strength. Strength is the ability of an object to resist the applied stress, to what extent can it bear the stress.
Therefore, some of the mechanical properties of solids involve:
- Elasticity: When an object is stretched, it changes its shape and when we leave, it retrieves its shape. Or we can say it is the property of retrieving the original shape once the external force is removed. For example Spring
- Plasticity: When an object changes its shape and never attains its original shape even when an external force is removed. It is the permanent deformation property. For example Plastic materials.
- Ductility: When an object is been pulled in thin sheets, wires or plates, it will be assumed that it has ductile properties. It is the property of drawing into thin wires/sheets/plates. For example Gold or Silver
- Strength: The ability to hold out applied stress without failure. Many types of objects have higher strength than others.