Question:
The plate resistance of a triode is $3 \times 10^3 \Omega$ and its mutual
conductance is $1.5 \times 10^{-3} A/V$. The amplification factor of
the triode is
The plate resistance of a triode is $3 \times 10^3 \Omega$ and its mutual
conductance is $1.5 \times 10^{-3} A/V$. The amplification factor of
the triode is
Updated On: Jul 13, 2024
- $5 \times 10^{-5}$
- 4.5
- 45
- $2 \times 10^5$
Show Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Given, $r_p = 3 \times 10^3 \, \Omega, g_m = 1.5 \times 10^{-3} A/V$
$\therefore$ Amplification factor, $\mu = g_m \times r_p = 4.5$
$therefore$ Correct option is (b).
$\therefore$ Amplification factor, $\mu = g_m \times r_p = 4.5$
$therefore$ Correct option is (b).
Was this answer helpful?
0
0
Top NEET Physics Questions
- A coil of inductive reactance $31\, \Omega$ has a resistance of 8 $\Omega$. It is placed in series with a condenser of capacitative reactance $25 \,\Omega$. The combination is connected to an a.c. source of 110 V. The power factor of the circuit is :-
- In an a.c. circuit with phase voltage V and current I, the power dissipated is
- A bubble in glass slab $ (\mu = 1.5) $ when viewed from one side appears at 5 cm and 2 cm from other side, then thickness of slab is
- A bulb is located on a wall. Its image is to be obtained on a parallel wall with the help of convex lens. If the distance between parallel walls is 'd' then required focal length of lens placed in between the walls is : -
- A convex lens is dipped in a liquid whose refractive index is equal to the refractive index of the lens. Then its focal length will
View More Questions
Top NEET Resistance Questions
- In an a.c. circuit the emf (e) and the current (i) at any instant core given respectively by \(e = E_0 sin ωt\), \(I = I_0 sin (ωt – ɸ)\). The average power in the circuit over one cycle of a.c. is.
- In a region of magnetic induction B =$10^2$ tesla, a circular coil of radius 30 cm and resistance $\pi^2$ ohm is rotated about an axis which is perpendicular to the direction of B and which forms a diameter of the coil. If the coil rotates at 200 rpm the amplitude of the alternating current induced in the coil is
- The charge flowing through a resistance $R$ varies with time t as $ Q = at - bt^2$ , where $a$ and $b$ are positive constants, The total heat produced in $R$ is :
- The color code of a resistance is given below : The values of resistance and tolerance, respectively, are :
The internal resistance of a 2.1 V cell which gives a current of 0.2 A through a resistance of 10 Ω is
View More Questions
Top NEET Questions
- A coil of inductive reactance $31\, \Omega$ has a resistance of 8 $\Omega$. It is placed in series with a condenser of capacitative reactance $25 \,\Omega$. The combination is connected to an a.c. source of 110 V. The power factor of the circuit is :-
- A liquid compound (x) can be purified by steam distillation only if it is
- In an a.c. circuit with phase voltage V and current I, the power dissipated is
- A bubble in glass slab $ (\mu = 1.5) $ when viewed from one side appears at 5 cm and 2 cm from other side, then thickness of slab is
- A bulb is located on a wall. Its image is to be obtained on a parallel wall with the help of convex lens. If the distance between parallel walls is 'd' then required focal length of lens placed in between the walls is : -
View More Questions
Concepts Used:
Resistance
Resistance is the measure of opposition applied by any object to the flow of electric current. A resistor is an electronic constituent that is used in the circuit with the purpose of offering that specific amount of resistance.
R=V/I
In this case,
v = Voltage across its ends
I = Current flowing through it
All materials resist current flow to some degree. They fall into one of two broad categories:
- Conductors: Materials that offer very little resistance where electrons can move easily. Examples: silver, copper, gold and aluminum.
- Insulators: Materials that present high resistance and restrict the flow of electrons. Examples: Rubber, paper, glass, wood and plastic.
Resistance measurements are normally taken to indicate the condition of a component or a circuit.
- The higher the resistance, the lower the current flow. If abnormally high, one possible cause (among many) could be damaged conductors due to burning or corrosion. All conductors give off some degree of heat, so overheating is an issue often associated with resistance.
- The lower the resistance, the higher the current flow. Possible causes: insulators damaged by moisture or overheating.