Question:
The materials which can be stretched to cause large strains are called as
The materials which can be stretched to cause large strains are called as
Show Hint
Elastomers are typically used in applications requiring flexibility, such as rubber bands or seals.
Updated On: May 9, 2025
- Plastic materials
- Elastomers
- Metals
- Brittle materials
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Elastomers are materials that can be stretched and return to their original shape once the stress is removed. These materials have large elastic deformations, which allow them to withstand large strains without permanent deformation.
Was this answer helpful?
0
0
Top Questions on Material Science
- Which one of the following manufacturing techniques is used for making window glass?
- GATE MT - 2026
- Metallurgical Engineering
- Material Science
- A rod is elastically deformed by a uniaxial stress resulting in a strain of 0.02. If the Poisson's ratio is 0.3, the volumetric strain is _______________ (answer up to three decimal places)
- GATE MT - 2026
- Metallurgical Engineering
- Material Science
- Dye penetrant test is based on the principle of
- GATE MT - 2026
- Metallurgical Engineering
- Material Science
- Both creep resistance and tensile strength of a metal can be enhanced by
- GATE MT - 2026
- Metallurgical Engineering
- Material Science
- Among the following options, a process for liquid-liquid separation is
- GATE MT - 2026
- Metallurgical Engineering
- Material Science
View More Questions
Questions Asked in AP EAPCET exam
- The voltage gains of two amplifiers connected in series are 8 and 12.5. If the voltage of the input signal is 200 \(\mu V\), then the voltage of the output signal is
- AP EAPCET - 2025
- Transistors
- If a straight current-carrying wire of linear density $0.12~\text{kg/m$ is suspended in mid-air by a uniform horizontal magnetic field of $0.5~\text{T}$ normal to the length of the wire, then the current through the wire is (Neglect earth’s magnetic field)}
- AP EAPCET - 2025
- Magnetism and matter
- The equations for the displacements of two particles in simple harmonic motion are \( y_1 = 0.1\sin\left(100\pi t + \frac{\pi}{3}\right) \) and \( y_2 = 0.1\cos(\pi t) \) respectively. The phase difference between the velocities of the two particles at a time \( t = 0 \) is
- AP EAPCET - 2025
- Waves and Oscillations
- If the velocity at the maximum height of a projectile projected at an angle of \(45^\circ\) is \(20 \, \text{m/s}\), then the maximum height reached by the projectile is:
- AP EAPCET - 2025
- Rotational motion
- Steam at \( 100^\circ \)C is passed into \( 114 \) g of water at \( 30^\circ \)C. The mass of water present in the mixture when the temperature of the water becomes \( 70^\circ \)C is:
- AP EAPCET - 2025
- Thermodynamics
View More Questions