Question:
The bulk modulus of a spherical object is ‘B’. If it is subjected to uniform pressure ‘p’, the fractional decrease in radius is
The bulk modulus of a spherical object is ‘B’. If it is subjected to uniform pressure ‘p’, the fractional decrease in radius is
Updated On: Apr 23, 2026
- \(\frac {p}{B}\)
- \(\frac {B}{3p}\)
- \(\frac {3p}{B}\)
- \(\frac {p}{3B}\)
Show Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The correct option is (D): \(\frac {p}{3B}\).
Was this answer helpful?
0
0
Top NEET Physics Questions
- A coil of inductive reactance $31\, \Omega$ has a resistance of 8 $\Omega$. It is placed in series with a condenser of capacitative reactance $25 \,\Omega$. The combination is connected to an a.c. source of 110 V. The power factor of the circuit is :-
- In an a.c. circuit with phase voltage V and current I, the power dissipated is
- A bubble in glass slab $ (\mu = 1.5) $ when viewed from one side appears at 5 cm and 2 cm from other side, then thickness of slab is
- A bulb is located on a wall. Its image is to be obtained on a parallel wall with the help of convex lens. If the distance between parallel walls is 'd' then required focal length of lens placed in between the walls is : -
- A convex lens is dipped in a liquid whose refractive index is equal to the refractive index of the lens. Then its focal length will
View More Questions
Top NEET mechanical properties of solids Questions
- Two wires are made of the same material and have the same volume. The first wire has cross-sectional area $A$ and the second wire has cross-sectional area $3A$. If the length of the first wire is increased by $\Delta l$ on applying a force $F$, how much force is needed to stretch the second wire by the same amount ?
- When a block of mass $M$ is suspended by a long wire of length $L$. the length of the wire becomes $(L+ l)$. The elastic potential energy stored in the extended wire is:
- The Young's modulus of steel is twice that of brass. Two wires of same length and of same area of cross section, one of steel and another of brass are suspended from the same roof. If we want the lower ends of the wires to be at the same level, then the weights added to the steel and brass wires must be in the ratio of
- Copper of fixed volume $V$ is drawn into wire of length $l$. When this wire is subjected to a constant force $F$, the extension produced in the wire is $ \Delta l $. Which of the following graphs is a straight line?
- If the ratio of diameters, lengths and Young's modulus of steel and copper wires shown in the figure are $p, q$ and $s$ respectively, then the corresponding ratio of increase in their lengths would be :
View More Questions
Top NEET Questions
- A coil of inductive reactance $31\, \Omega$ has a resistance of 8 $\Omega$. It is placed in series with a condenser of capacitative reactance $25 \,\Omega$. The combination is connected to an a.c. source of 110 V. The power factor of the circuit is :-
- A liquid compound (x) can be purified by steam distillation only if it is
- In an a.c. circuit with phase voltage V and current I, the power dissipated is
- A bubble in glass slab $ (\mu = 1.5) $ when viewed from one side appears at 5 cm and 2 cm from other side, then thickness of slab is
- A bulb is located on a wall. Its image is to be obtained on a parallel wall with the help of convex lens. If the distance between parallel walls is 'd' then required focal length of lens placed in between the walls is : -
View More Questions