On the horizontal surface of a truck a block of mass 1 kg is placed (µ = 0.6) and truck is moving with acceleration 5 m/s2 then the frictional force on block will be : -
On the horizontal surface of a truck a block of mass 1 kg is placed (µ = 0.6) and truck is moving with acceleration 5 m/s2 then the frictional force on block will be : -
5N
6N
5.88N
8N
The Correct Option is A
Solution and Explanation
The correct option is (A): 5N.
frL = µs.N pseudo force = ma
= µs.mg = 1 × 5
= 0.6 ×1 × 10 F = 5 N
= 6N
∴ F < frL block does not move
static firction = applied force
\(\Rightarrow\) fr = 5N
Top NEET Physics Questions
- A coil of inductive reactance $31\, \Omega$ has a resistance of 8 $\Omega$. It is placed in series with a condenser of capacitative reactance $25 \,\Omega$. The combination is connected to an a.c. source of 110 V. The power factor of the circuit is :-
- In an a.c. circuit with phase voltage V and current I, the power dissipated is
- A bubble in glass slab $ (\mu = 1.5) $ when viewed from one side appears at 5 cm and 2 cm from other side, then thickness of slab is
- A bulb is located on a wall. Its image is to be obtained on a parallel wall with the help of convex lens. If the distance between parallel walls is 'd' then required focal length of lens placed in between the walls is : -
- A convex lens is dipped in a liquid whose refractive index is equal to the refractive index of the lens. Then its focal length will
Top NEET laws of motion Questions
Two stones of masses m and 2m are whirled in horizontal circles, the heavier one in a radius r/2 and the lighter one in radius r. The tangential speed of lighter stone is n times that of the value of heavier stone when they experience same centripetal forces. The value of n is
- An explosion breaks a rock into three parts in a horizontal plane. Two of them go off at right angles to each other. The first part of mass $1\, kg$ moves with a speed of $12 \, ms^{-1}$ and the second part of mass $2 \,kg$ moves with $8 \, ms^{-1}$ speed. If the third part files off with $4 \, ms^{-1}$ speed, then its mass is :
- An object flying in air with velocity $\left(20\hat{i} + 25\hat{j} - 12\hat{k}\right)$ suddenly breaks in two pieces whose masses are in the ratio $1 : 5$. The smaller mass flies off with a velocity $\left(100\hat{i} + 35\hat{j} + 8\hat{k}\right)$. The velocity of the larger piece will be :
- 250 N force is required to raise 75 kg mass from a pulley. If rope is pulled 12 m then the load is lifted to 3m, the efficiency of pulley system will be : -
- Three blocks of mass $4\, kg$, $2 \, kg,\, 1\, kg$ respectively are in contact on a frictionless table as shown in the figure. If a force of $14\, N$ is applied on the $4\, kg$ block, the contact force between the $4 \,kg$ and the $2 \,kg$ block will be
Top NEET Questions
- A coil of inductive reactance $31\, \Omega$ has a resistance of 8 $\Omega$. It is placed in series with a condenser of capacitative reactance $25 \,\Omega$. The combination is connected to an a.c. source of 110 V. The power factor of the circuit is :-
- In an a.c. circuit with phase voltage V and current I, the power dissipated is
- A bubble in glass slab $ (\mu = 1.5) $ when viewed from one side appears at 5 cm and 2 cm from other side, then thickness of slab is
- A bulb is located on a wall. Its image is to be obtained on a parallel wall with the help of convex lens. If the distance between parallel walls is 'd' then required focal length of lens placed in between the walls is : -
- A convex lens is dipped in a liquid whose refractive index is equal to the refractive index of the lens. Then its focal length will
Concepts Used:
Motion in a Plane
It is a vector quantity. A vector quantity is a quantity having both magnitude and direction. Speed is a scalar quantity and it is a quantity having a magnitude only. Motion in a plane is also known as motion in two dimensions.
Equations of Plane Motion
The equations of motion in a straight line are:
v=u+at
s=ut+½ at2
v2-u2=2as
Where,
- v = final velocity of the particle
- u = initial velocity of the particle
- s = displacement of the particle
- a = acceleration of the particle
- t = the time interval in which the particle is in consideration