MOPU (in the context of offshore drilling and production systems) stands for
Show Hint
- Mobile Offshore Process Unit
- Mobile Offshore Piping Unit
- Mobile Offshore Production Unit
- Mobile Oil Production Unit
The Correct Option is C
Solution and Explanation
MOPU refers to a Mobile Offshore Production Unit, which is a floating platform used in offshore drilling operations for oil and gas production. It is designed to support production equipment, with no need for a permanent structure.
Step 1: The MOPU is critical for offshore production in remote locations.
Step 2: It is not related to piping, oil, or process systems, which eliminates options (A), (B), and (D).
Thus, the correct option is (C).
Top GATE PE Petroleum Production Operations Questions
- The primary objective of the electrostatic grid in electrostatic heater-treater used in crude oil processing is to
Four curves designated as I, II, III, and IV are shown in the figure. \( P_b \) is the bubble point pressure of a crude oil at the given temperature. Which ONE of the following options correctly depicts the solubility of asphaltene (\( q_a \)) in the crude oil with pressure (\( P \)) at a given temperature?
Four curves designated as I, II, III, and IV are shown in the figure. \( q_f \) is the bottomhole oil flow rate, \( q_s \) is the surface oil flow rate, and \( B_o \) is the oil formation volume factor. Which ONE of the following curves depicts the minimum wellbore storage effect?
Match the entries in GROUP I with the entries in GROUP II.
Which ONE of the following options is CORRECT?
- Crude oil denser than pure water has the API gravity:
Top GATE PE Offshore Structure Questions
- Which of the following offshore rigs has the HIGHEST water depth of operation?
- Select ALL the safety system(s) that is/are required in an offshore platform.
Figure shows an inextensible catenary mooring cable in still water. The submerged weight (per meter length), and the anchor radius are 100 kg/m and 50 m, respectively. If horizontal tension ($T_h$) in the catenary is 1600 kg, the catenary length (AB) is ............. m (rounded to two decimal places).
- An empty steel pipeline with massless endcaps has an outer diameter, $D$, and thickness, $t$. The density of steel is $7850\ \mathrm{kg/m^3}$. The critical $D/t$ ratio at which the pipeline starts floating in seawater of density $1025\ \mathrm{kg/m^3}$ is _________ (rounded to two decimal places).
- A four–column semi–submersible floater is located offshore. The diameter of each column is $5~\text{m}$. Consider the total displaced weight of seawater of the semi–submersible as $4000~\text{tonnes}$. Assume added mass contribution as $50\%$ of the semi–submersible weight, and seawater density as $1025~\text{kg/m}^3$. (Acceleration due to gravity $=9.81~\text{m/s}^2$.) The natural period of oscillation of the floater in vertical mode is __________ seconds (rounded to one decimal place).
Top GATE PE Questions
- Four fair coins are tossed simultaneously. The probability that at least one tail turns up is:
- Let \( \vec{A} = 2\ell - \mathbf{j} + \mathbf{k} \) and \( \vec{B} = \ell + \mathbf{f} \), where \( \ell, \mathbf{f}, \) and \( \mathbf{k} \) are unit vectors. The projection of \( \vec{B} \) on \( \vec{A} \) is:
- The value of \( \lim_{x \to \frac{\pi}{2}} \left( \frac{\cos x}{x - \frac{\pi}{2}} \right) \) is:
- Which ONE of the following CANNOT be obtained from pressure transient analysis in well testing?
- The primary objective of the electrostatic grid in electrostatic heater-treater used in crude oil processing is to