In the stress-strain curve of mild steel, plastic deformation starts at the ________.
Show Hint
- proportional limit
- elastic limit
- upper yield point
- lower yield point
The Correct Option is B
Solution and Explanation
Step 1: Analyze the stress-strain curve of mild steel.
In the stress-strain curve of mild steel:
The proportional limit marks the end of linear elasticity (Hooke's Law).
The elastic limit is the maximum stress up to which the material returns to its original shape upon unloading.
Beyond the elastic limit, the material undergoes plastic deformation.
The yield point (upper and lower) indicates the start of more obvious plastic behavior, especially in mild steel.
Step 2: Define plastic deformation.
Plastic deformation starts when the material can no longer return to its original shape, which technically begins just after the elastic limit, although yield points make it more evident in mild steel.
Correct Answer: (B) elastic limit.
Top GATE NM Applied Mechanics and Structures Questions
- The dynamic response amplitude \( |H(\omega)| \) of a single degree of freedom system subjected to support motion is given by the following expression: \[ |H(\omega)| = \sqrt{\frac{1 + 4 \zeta^2 \left( \frac{\omega}{\omega_n} \right)^2 }{\left[ 1 - \left( \frac{\omega}{\omega_n} \right)^2 \right]^2 + 4 \zeta^2 \left( \frac{\omega}{\omega_n} \right)^2} } \] Where the damping ratio is \( \zeta \), the excitation frequency is \( \omega \), and the natural frequency of the system is \( \omega_n \). The amplitude \( |H(\omega)| \) increases with an increase in damping ratio (\( \zeta \)) if the excitation frequency (\( \omega \)) is ________ the natural frequency (\( \omega_n \)) of the system.
The midship section of a barge of breadth \( W \) and depth \( H \) is shown in the figure. All plate thicknesses are equal. The barge is subjected to a longitudinal bending moment in the upright condition. Which one of the following statements is correct?
A square‑shaped body is subjected to only direct tensile stresses \(\sigma_x\) and \(\sigma_y\) as shown. If \(\sigma_x > \sigma_y\), then the value of normal stress (\(\sigma_{\theta}\)) and shear stress (\(\tau_{\theta}\)) respectively are ________.
The beam PQRS is subjected to a vertical point load of \(10\) kN at point S as shown in the figure. The magnitude of fixed end moment at P is _________ kN‑m.
- For a butt weld joint of two plates, which one of the following loading scenarios has the least permissible stress?
Top GATE NM Strength of Materials Questions
The midship section of a barge of breadth \( W \) and depth \( H \) is shown in the figure. All plate thicknesses are equal. The barge is subjected to a longitudinal bending moment in the upright condition. Which one of the following statements is correct?
A square‑shaped body is subjected to only direct tensile stresses \(\sigma_x\) and \(\sigma_y\) as shown. If \(\sigma_x > \sigma_y\), then the value of normal stress (\(\sigma_{\theta}\)) and shear stress (\(\tau_{\theta}\)) respectively are ________.
- For a butt weld joint of two plates, which one of the following loading scenarios has the least permissible stress?
- The displacement field of a body is given by \( \vec{u} = yx \hat{i} + yz \hat{j} + (z + x^2) \hat{k} \). The shear strain \( \gamma_{xy} \) at \( (2, 1, 5) \) is:
- Let \( \omega_f \) be the excitation frequency of a sinusoidal load and \( \omega_n \) be the natural frequency of a single degree of freedom system. Then the dynamic response of the system is highly affected by the stiffness of the system when:
Top GATE NM Questions
- If \( \rightarrow \) denotes increasing order of intensity, then the meaning of the words [dry \( \rightarrow \) arid \( \rightarrow \) parched] is analogous to [diet \( \rightarrow \) fast \( \rightarrow \) \(\_\_\_\_\_\_\_\_\)]. Which one of the given options is appropriate to fill the blank?
- If two distinct non-zero real variables \( x \) and \( y \) are such that \( (x + y) \) is proportional to \( (x - y) \), then the value of \( \frac{x}{y} \) is:
- Consider the following sample of numbers: \[ 9, 18, 11, 14, 15, 17, 10, 69, 11, 13 \] The median of the sample is:
- The number of coins of ₹1, ₹5, and ₹10 denominations that a person has are in the ratio 5:3:13. Of the total amount, the percentage of money in ₹5 coins is:
- For positive non-zero real variables \( p \) and \( q \), if \[ \log \left( p^2 + q^2 \right) = \log p + \log q + 2 \log 3, \] then the value of \( \frac{p^4 + q^4}{p^2 q^2} \) is: