Question:

In pure resistive alternating circuit, phase difference between voltage and current is

Show Hint

In a pure resistor \(i = (V_0/R)\sin\omega t\), so current and voltage are in phase and the phase difference is 0.
Updated On: Nov 19, 2026
  • \( \pi \)
  • \( \pi/2 \)
  • \( 3\pi/2 \)
  • \( 0 \)
Show Solution
collegedunia
Verified By Collegedunia

The Correct Option is D

Solution and Explanation

Step 1: Understanding the Concept:
In a purely resistive AC circuit only a resistor \(R\) is connected to the AC source. There is no inductor and no capacitor, so nothing stores energy and nothing delays the current.

Step 2: Key Formula or Approach:
Let the source voltage be \(V = V_0 \sin \omega t\). By Ohm's law the current at every instant is \(I = V/R\).

Step 3: Detailed Explanation:
Put the voltage in Ohm's law: \[ I = \frac{V_0 \sin \omega t}{R} = I_0 \sin \omega t, \qquad I_0 = \frac{V_0}{R} \] The voltage and the current both contain \(\sin \omega t\) with no extra angle added. They reach zero together and reach their peaks together. So the phase difference is \(\phi = 0\).

Step 4: Check option (1):
A phase difference of \(\pi\) means the current is always opposite to the voltage. This does not happen in a resistor. Option (1) is wrong.

Step 5: Check options (2) and (3):
A phase difference of \(\pi/2\) belongs to a pure inductor (voltage leads by \(\pi/2\)) or a pure capacitor (current leads by \(\pi/2\)). The value \(3\pi/2\) is the same as a lead or lag of \(\pi/2\) in the other direction. A resistor has none of this. Both options are wrong.

Step 6: Check option (4):
The phase difference is zero, so option (4) is right.

Final Answer:
In a pure resistor voltage and current are in phase, so the phase difference is zero. This is option (4). \[ \boxed{0} \]
Was this answer helpful?
0
0