Question:
In a p-n-p transistor,
In a p-n-p transistor,
Show Hint
Remember that the doping levels in a transistor are crucial for controlling its current gain and behavior.
Updated On: Mar 18, 2026
- emitter is heavily doped and collector is moderately doped.
- emitter is moderately doped and collector is heavily doped.
- both emitter and collector are heavily doped.
- both emitter and collector are moderately doped.
Show Solution
Verified By Collegedunia
The Correct Option is A
Approach Solution - 1
In a p-n-p transistor, the emitter is heavily doped to increase the number of charge carriers for current conduction. The collector is moderately doped to allow proper control over the current flow. The base, which is located between the emitter and collector, is lightly doped.
Thus, the correct relation for the doping levels in a p-n-p transistor is:
\[
\text{Emitter is heavily doped, Collector is moderately doped.}
\]
Was this answer helpful?
0
0
Show Solution
Verified By Collegedunia
Approach Solution -2
Step 1: Understand the structure of a p-n-p transistor.
A p-n-p transistor consists of two p-type semiconductor regions separated by a thin n-type region. The three regions are:
- Emitter (p-type)
- Base (n-type)
- Collector (p-type)
Step 2: Doping levels in the regions.
- The emitter is heavily doped to inject a large number of charge carriers (holes in the case of p-n-p).
- The base is very thin and lightly doped so that most of the injected charge carriers can pass through it.
- The collector is moderately doped and larger in size to collect the carriers and dissipate heat efficiently.
Step 3: Conclusion.
In a p-n-p transistor, the emitter is heavily doped and the collector is moderately doped.
Hence, the correct answer is: emitter is heavily doped and collector is moderately doped.
A p-n-p transistor consists of two p-type semiconductor regions separated by a thin n-type region. The three regions are:
- Emitter (p-type)
- Base (n-type)
- Collector (p-type)
Step 2: Doping levels in the regions.
- The emitter is heavily doped to inject a large number of charge carriers (holes in the case of p-n-p).
- The base is very thin and lightly doped so that most of the injected charge carriers can pass through it.
- The collector is moderately doped and larger in size to collect the carriers and dissipate heat efficiently.
Step 3: Conclusion.
In a p-n-p transistor, the emitter is heavily doped and the collector is moderately doped.
Hence, the correct answer is: emitter is heavily doped and collector is moderately doped.
Was this answer helpful?
0
0
Top AP EAPCET Physics Questions
- A body is projected from the ground at an angle of $\tan^{-1} \left( \frac{8}{7}\right)$ with the horizontal. The ratio of the maximum height attained by it to its range is
- A lens forms real and virtual images of an object, when the object is at $u_{1}$ and $u_{2}$ distances respectively. If the size of the virtual image is double that of the real image, then the focal length of the lens is (take, the magnification of the real image as $m$ )
- Two spheres $P$ and $Q$, each of mass $200\, g$ are attached to a string of length one metre as shown in the figure. The string and the spheres are then whirled in a horizontal circle about $O$ at a constant angular speed. The ratio of the tension in the string between $P$ and $Q$ to that of between $P$ and $O$ is $(P$ is at mid-point of the line joining $O$ and $Q$ )
- The radii of the two columns in a U - tube are r1 and r2. When a liquid of density p (angle of contact is $ 0{}^\circ $ ) is filled in it, the level difference of the liquid in the two arms is h. The surface tension of the liquid is: (g = acceleration due to gravity)
- A rigid metallic sphere is spinning around its own axis in the absence of external torque. If the temperature is raised, its volume increases by $9 \%$. The change in its angular speed is
View More Questions
Top AP EAPCET Transistors Questions
- In an \( npn \) transistor circuit, the collector current is \( 10 \) mA. If \( 95\% \) of the electrons emitted reach the collector, then the base current is nearly:
- In a transistor amplifier used in CE configuration, the phase difference between input voltage and output voltage is:
- In a transistor, when the emitter current changes by 9.85 mA, the collector current changes to 9.5 mA. Then the base current is
- For a CE transistor amplifier, the current amplification factor is 59 and the emitter current is 6.6 mA. Then the base current is
- In a transistor circuit, if emitter and collector connections are interchanged then
View More Questions
Top AP EAPCET Questions
- A body is projected from the ground at an angle of $\tan^{-1} \left( \frac{8}{7}\right)$ with the horizontal. The ratio of the maximum height attained by it to its range is
- The four quantum numbers of the valence electron of potassium are :
- A lens forms real and virtual images of an object, when the object is at $u_{1}$ and $u_{2}$ distances respectively. If the size of the virtual image is double that of the real image, then the focal length of the lens is (take, the magnification of the real image as $m$ )
- Two spheres $P$ and $Q$, each of mass $200\, g$ are attached to a string of length one metre as shown in the figure. The string and the spheres are then whirled in a horizontal circle about $O$ at a constant angular speed. The ratio of the tension in the string between $P$ and $Q$ to that of between $P$ and $O$ is $(P$ is at mid-point of the line joining $O$ and $Q$ )
- The volume of $0.02\, M$ acidified permanganate solution required for complete reaction of $60\, mL$ of $0.01\, MI^{-}$ ion solution to form $I_2$ in $mL$ is
View More Questions