Question:
In a conventional copper converter, the blowing of air or oxygen is done from
In a conventional copper converter, the blowing of air or oxygen is done from
Show Hint
Peirce-Smith = Side Tuyeres. Copper converters are horizontal, unlike vertical steel converters.
Updated On: Jul 4, 2026
- Top of the converter
- Bottom of the converter
- Side of the converter
- No blowing is required
Show Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Step 1: Concept A copper converter (typically the Peirce-Smith type) oxidizes the sulphur and iron from the copper matte.
Step 2: Meaning The vessel is a horizontal cylinder that can be rotated for charging and pouring.
Step 3: Analysis In these horizontal converters, air is introduced through a row of pipes called tuyeres.
Step 4: Conclusion These tuyeres are located along the side of the horizontal vessel, making side-blowing the standard method. Final Answer: (C)
Step 2: Meaning The vessel is a horizontal cylinder that can be rotated for charging and pouring.
Step 3: Analysis In these horizontal converters, air is introduced through a row of pipes called tuyeres.
Step 4: Conclusion These tuyeres are located along the side of the horizontal vessel, making side-blowing the standard method. Final Answer: (C)
Was this answer helpful?
0
0
Top AP ECET Metallurgical Eng Metallurgical Engineering Questions
- The crushing efficiency of a crusher is the ratio of
- Grindability of a material does not depend upon its
- Copper deposits are found in India at the following location
- Electrochemical corrosion can occur only if _____________ is present in contact with the metal.
- Hoop's process is predominantly used for the electrolytic refining of
View More Questions
Top AP ECET Metallurgical Eng Extractive Metallurgy Questions
- Electrochemical corrosion can occur only if _____________ is present in contact with the metal.
- Hoop's process is predominantly used for the electrolytic refining of
- In hydrometallurgical process of leaching of copper ore, _____________ acid is used for the purpose.
- Which of the following statements regarding Kroll's process is incorrect?
- The products of roasting a sulphide ore is (are)
View More Questions
Top AP ECET Metallurgical Eng Questions
- Order of the matrix $\begin{bmatrix} 1 & 6 \\ 2 & 0 \\ 7 & -1 \end{bmatrix}$ is
- If two rows (or columns) of a determinant of order 3 are identical then the value of determinant is
- Co-factor of -4 in $\begin{vmatrix} 1 & 2 & 3 \\ -4 & 3 & 6 \\ 2 & -7 & 9 \end{vmatrix}$ is
- The Matrix $\begin{bmatrix} a & h & g \\ h & b & f \\ g & f & c \end{bmatrix}$ is
- If $A = \begin{bmatrix} 0 & 0 & 1 \\ 0 & 1 & 0 \\ 1 & 0 & 0 \end{bmatrix}$ then $(A^{-1}) =$
View More Questions