Question:
Identify the treatment technology/technologies NOT recommended for highly biodegradable organic solid wastes.
Identify the treatment technology/technologies NOT recommended for highly biodegradable organic solid wastes.
Show Hint
Avoid open dumping — it causes pollution and health hazards. Use biological treatments like composting or digestion for organic waste.
Updated On: Feb 4, 2026
- Biohydrogenation
- Anaerobic digestion
- Composting
- Open dumping
Show Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Biodegradable organic waste should be managed using sustainable and environment-friendly technologies:
- Biohydrogenation (A): Suitable for converting organic material into bio-hydrogen, an emerging green fuel.
- Anaerobic digestion (B): Widely used method for treating organic waste in the absence of oxygen, producing biogas as a useful by-product.
- Composting (C): An aerobic process of biodegradation that converts organic matter into useful compost.
- Open dumping (D): Incorrect practice. It leads to uncontrolled decomposition, release of methane, foul smell, contamination of soil and groundwater, and spread of disease vectors.
Therefore, open dumping is not recommended for any kind of waste, especially not for highly biodegradable organic matter.
- Biohydrogenation (A): Suitable for converting organic material into bio-hydrogen, an emerging green fuel.
- Anaerobic digestion (B): Widely used method for treating organic waste in the absence of oxygen, producing biogas as a useful by-product.
- Composting (C): An aerobic process of biodegradation that converts organic matter into useful compost.
- Open dumping (D): Incorrect practice. It leads to uncontrolled decomposition, release of methane, foul smell, contamination of soil and groundwater, and spread of disease vectors.
Therefore, open dumping is not recommended for any kind of waste, especially not for highly biodegradable organic matter.
Was this answer helpful?
0
0
Top GATE CE Environmental Engineering Questions
- The number of degrees of freedom for a natural open channel flow with a mobile bed is
- The following table gives various components of Municipal Solid Waste (MSW) and a list of treatment/separation techniques.
Component of MSW Treatment/separation technique P - Ferrous metals i - Incineration Q - Aluminum and copper ii - Rapid composting R- Food waste iii - Eddy current separator S-Cardboard iv - Magnetic separator
The CORRECT match is - The primary air pollutant(s) is/are
- Activated carbon is used to remove a pollutant from wastewater in a mixed batch reactor, which follows first-order reaction kinetics.
At a reaction rate of 0.38 /day, the time (in days) required to remove the pollutant by 95% is ______ (rounded off to 1 decimal place). - A water treatment plant treats 25 MLD water with a natural alkalinity of 4.0 mg/L (as CaCO3). It is estimated that, during coagulation of this water, 450 kg/day of calcium bicarbonate (Ca(HCO3)2) is required based on the alum dosage.
Consider the atomic weights as: Ca-40, H-1, C-12, O-16.
The quantity of pure quick lime, CaO (in kg) required for this process per day is _____ (rounded off to 2 decimal places).
View More Questions
Top GATE CE Engineered systems for solid waste management Questions
- In a city, the chemical formula of biodegradable fraction of municipal solid waste (MSW) is \( C_{100}H_{250}O_{80}N \). The waste has to be treated by forced-aeration composting process for which air requirement has to be estimated.
Assume oxygen in air (by weight) = 23%, and density of air = 1.3 kg/m$^3$. Atomic mass: \( C = 12 \), \( H = 1 \), \( O = 16 \), \( N = 14 \). C and H are oxidized completely whereas N is converted only into NH$_3$ during oxidation.
For oxidative degradation of 1 tonne of the waste, the required theoretical volume of air (in m$^3$/tonne) will be (round off to the nearest integer)
Determine the correctness or otherwise of the following Assertion [a] and the Reason [r].
Assertion [a]: One of the best ways to reduce the amount of solid wastes is to reduce the consumption of raw materials.
Reason [r]: Solid wastes are seldom generated when raw materials are converted to goods for consumption.- Which one of the following statements is correct?
Top GATE CE Questions
- If \(1+\frac{1}{2}+\frac{1}{3}+\frac{1}{4}+\frac{1}{5}+\frac{1}{6}+\frac{1}{7}+\frac{1}{8}+\frac{1}{9}....\frac{1}{29} =\frac{N}{29!}\) Find the remainder when N is divided by 19.
- What will be the relative density?
M = 0.5 percentage of air voids
γmin = 1.3 gm/cc
γmax = 1.8 gm/cc - Find RL of R?
RL of P [BM = 200.000Point Staff Readings
Back sideStaff Readings
Fore sideRemarks P -2.050 - 200.000 Q 1.050 0.95 Change Point R - -1.655 - - What will the angle of the failure plane from horizontal for sand be?
σ3=300
σ1=300+100=400 - Which of the following having negative skamptam Pore water coefficient?
View More Questions