Question:
The primary air pollutant(s) is/are
The primary air pollutant(s) is/are
Updated On: Feb 3, 2026
- Sulphur dioxide
- Lead
- Ozone
- Sulphuric acid
Show Solution
Verified By Collegedunia
The Correct Option is A, B
Solution and Explanation
The correct options are (A) and (B).
Was this answer helpful?
0
0
Top GATE CE Environmental Engineering Questions
- The number of degrees of freedom for a natural open channel flow with a mobile bed is
- The following table gives various components of Municipal Solid Waste (MSW) and a list of treatment/separation techniques.
Component of MSW Treatment/separation technique P - Ferrous metals i - Incineration Q - Aluminum and copper ii - Rapid composting R- Food waste iii - Eddy current separator S-Cardboard iv - Magnetic separator
The CORRECT match is - Activated carbon is used to remove a pollutant from wastewater in a mixed batch reactor, which follows first-order reaction kinetics.
At a reaction rate of 0.38 /day, the time (in days) required to remove the pollutant by 95% is ______ (rounded off to 1 decimal place). - A water treatment plant treats 25 MLD water with a natural alkalinity of 4.0 mg/L (as CaCO3). It is estimated that, during coagulation of this water, 450 kg/day of calcium bicarbonate (Ca(HCO3)2) is required based on the alum dosage.
Consider the atomic weights as: Ca-40, H-1, C-12, O-16.
The quantity of pure quick lime, CaO (in kg) required for this process per day is _____ (rounded off to 2 decimal places). - Which one of the following products is NOT obtained in anaerobic decomposition of glucose ?
View More Questions
Top GATE CE Air and Noise Pollution Questions
For the elevation and temperature data given in the table, the existing lapse rate in the environment is __ °C/100 m (round off to two decimal places).
For the elevation and temperature data given in the table, the existing lapse rate in the environment is °C/100 m (round off to two decimal places).
- Column I presents common air pollutants, and column II presents treatment technologies commonly employed to control air pollutants.The option that CORRECTLY matches the air pollutant with its treatment technology is:
Air pollutant Treatment technology 1 Dust (size 5-25 microns) P Cyclone separator 2 Carbon monoxide (CO) Q Wet lime-water scrubber 3 Sulfur dioxide (SO2) R Electrostatic precipitator 4 Fly ash (size < 2.5 microns) S Catalytic converter - In an industry, a cyclone collector with 80% efficiency is installed for air purification, followed by an electrostatic precipitator with 50% efficiency. The concentration of particles entering the cyclone collector is 10 mg/m\(^3\).
The concentration (in mg/m\(^3\)) of particles exiting the precipitator is (rounded off to two decimal places).
Top GATE CE Questions
- If \(1+\frac{1}{2}+\frac{1}{3}+\frac{1}{4}+\frac{1}{5}+\frac{1}{6}+\frac{1}{7}+\frac{1}{8}+\frac{1}{9}....\frac{1}{29} =\frac{N}{29!}\) Find the remainder when N is divided by 19.
- What will be the relative density?
M = 0.5 percentage of air voids
γmin = 1.3 gm/cc
γmax = 1.8 gm/cc - Find RL of R?
RL of P [BM = 200.000Point Staff Readings
Back sideStaff Readings
Fore sideRemarks P -2.050 - 200.000 Q 1.050 0.95 Change Point R - -1.655 - - What will the angle of the failure plane from horizontal for sand be?
σ3=300
σ1=300+100=400 - Which of the following having negative skamptam Pore water coefficient?
View More Questions