For a transistor to act as a switch, it must be operated in
- Active region
- Saturation state only
- Cut-off state only
- Saturation and cut-off state
The Correct Option is D
Solution and Explanation
The correct option is (D): A transistor acts as a switch when it is operated in saturation and cut-off state.
Top JEE Main Physics Questions
- Two masses $m$ and $\frac{m}{2}$ are connected at the two ends of a massless rigid rod of length $l$. The rod is suspended by a thin wire of torsional constant $k$ at the centre of mass of the rod-mass system(see figure). Because of torsional constant $k$, the restoring torque is $\tau =k\theta$ for angular displacement $\theta$. If the rod is rota ted by $\theta_0$ and released, the tension in it when it passes through its mean position will be:
A black body is at a temperature of 2880 K. The energy of radiation emitted by this body with wavelength between 499 nm and 500 nm is U1, between 999 nm and 1000 nm is U2 and between 1499 nm and 1500 nm is U3. The Wien's constant, b = 2.88×106 nm-K. Then,
- $I _{ CM }$ is the moment of inertia of a circular disc about an axis (CM) passing through its center and perpendicular to the plane of disc $I_{A B}$ is it's moment of inertia about an axis $AB$ perpendicular to plane and parallel to axis $CM$ at a distance $\frac{2}{3} R$ from center Where $R$ is the radius of the dise The ratio of $I _{ AB }$ and $I _{ CM }$ is $x: 9$ The value of $x$ is______
- A nucleus disintegrates into two smaller parts, which have their velocities in the ratio $3: 2$ The ratio of their nuclear sizes will be $\left(\frac{x}{3}\right)^{\frac{1}{3}}$ The value of ' $x$ ' is:-
- A particle starts with an initial velocity of 10.0 m/s along x-direction and accelerates uniformly at the rate of 2.0 m/s$^2$. The time taken by the particle to reach the velocity of 60.0 m/s is
Top JEE Main Transistors Questions
Top JEE Main Questions
- Two masses $m$ and $\frac{m}{2}$ are connected at the two ends of a massless rigid rod of length $l$. The rod is suspended by a thin wire of torsional constant $k$ at the centre of mass of the rod-mass system(see figure). Because of torsional constant $k$, the restoring torque is $\tau =k\theta$ for angular displacement $\theta$. If the rod is rota ted by $\theta_0$ and released, the tension in it when it passes through its mean position will be:
What will be the equilibrium constant of the given reaction carried out in a \(5 \,L\) vessel and having equilibrium amounts of \(A_2\) and \(A\) as \(0.5\) mole and \(2 \times 10^{-6}\) mole respectively?
The reaction : \(A_2 \rightleftharpoons 2A\)- The value of is
- The number of terms of an is even. The sum of the odd terms is and of the even terms is . The last term exceeds the first by . Then the number of terms in the series is ______.
A black body is at a temperature of 2880 K. The energy of radiation emitted by this body with wavelength between 499 nm and 500 nm is U1, between 999 nm and 1000 nm is U2 and between 1499 nm and 1500 nm is U3. The Wien's constant, b = 2.88×106 nm-K. Then,
Concepts Used:
Transistors
Transistor
A transistor is a type of semiconductor device that can be used to both conduct and insulate electric current or voltage. A transistor basically acts as a switch and an amplifier. In simple words, we can say that a transistor is a miniature device that is used to control or regulate the flow of electronic signals.
Parts of a Transistor:
A transistor is a combination of three terminals made of semiconducting materials that help in making a connection to an external circuit and allow current to flow. The three terminals are:
- Base: The base activates the transistor. It is thin and lightly doped. It is put in the centre of the transistor.
- Emitter: The emitter is the negative terminal of the transistor. It is heavily doped and is moderately sized.
- Collector: The collector is the negative terminal of the transistor. It is located on the right side of a transistor and is moderately doped. It is larger than the emitter.
Read More: Difference Between NPN and PNP Transistor
Types of Transistors:
A transistor is a type of electronic device which is formed by p-type and n-type semiconductors.
NPN Transistor
- NPN transistor is a type of Bipolar Junction Transistor.
- In this, electrons are major current carriers, and minor ones are holes.
- Their arrangement is in such a way that N-type doped semiconductors are separated by the layer of P-type doped semiconductors which is a thin layer of material embedded between them.
- Emitter Current = Collector Current + Base Current
PNP Transistor
- PNP transistor is also a type of Bipolar Junction Transistor.
- In these, holes are the major source that carries current, and electrons are minor.
- Their arrangement is in a way that P-type doped semiconductor is separated by N-type doped semiconductor material which is a thin layer.
- Emitter Current = Collector Current + Base Current
Read More: Characteristics of a Transistor
Configurations of a Transistor:
Using the three types of configuration can be used to design any transistor circuit. The three types of configuration of a transistor are:
- Common Emitter Transistor
- Common Base Transistor
- Common Collector Transistor
Common Emitter (CE) Configuration of a Transistor
In Common Emitter Configuration, the transistor’s emitter terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Base-Emitter voltage (VBE) when Collector-Emitter voltage (VCE) is held constant.
- Rin = ΔVBE/ΔIB | VCE = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
- Rout = ΔVCE/ΔIC | IB = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the base current (IB) when the collector-emitter voltage (VCE) is constant.
- α = ΔIC/ΔIB | VCB = Constant
Common Base (CB) Configuration of a Transistor
In Common Base Configuration, the transistor’s base terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IE) with Base-Emitter voltage (VBE) when the Collector Base voltage (VCB) is held constant.
- Rin = ΔVBE/ΔIE | VCB = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Base voltage (VCB) when the emitter current (IE) is held constant.
- Rout = ΔVCB/ΔIB | IE = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the emitter current (IE) when the Collector Base voltage (VCB) is constant.
- α = ΔIC/ΔIE | VCB = Constant
Common Collector Configuration of a Transistor
In Common Collector Configuration, the transistor’s collector terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Collector-Base voltage (VCB) when the Collector Base voltage (VCB) is held constant.
Output Characteristics
- Variation of emitter current (IE) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
Current Transfer Characteristics
- The variation of the collector current (IE) with the base current (IB) when the Collector-Emitter voltage (VCE) is constant.