Step 1: Understanding the Circuit:
The \(10\ \Omega\) resistor and the \(30\ \Omega\) resistor are in series with the \(20\) V battery.
The switch S is joined across the \(30\ \Omega\) resistor, so it acts as a bypass wire for that resistor when it is closed.
Step 2: Key Formula or Approach:
The current in a circuit is the battery voltage divided by the total resistance (Ohm's law).
\[ I = \frac{V}{R_{\text{total}}} \]
Resistors in series add up: \(R_{\text{total}} = R_1 + R_2\).
Step 3: Switch S open:
With S open, no current can pass through the bypass wire. The current must pass through both resistors.
\[ R_{\text{total}} = 10 + 30 = 40\ \Omega \]
\[ I = \frac{20}{40} = 0.5\ \text{A} \]
The same current flows through the \(10\ \Omega\) resistor because it is in series.
Step 4: Switch S closed:
With S closed, the switch wire joins the two ends of the \(30\ \Omega\) resistor. Current takes this zero-resistance path, so the \(30\ \Omega\) resistor is short-circuited and carries no current.
Only the \(10\ \Omega\) resistor is left in the circuit.
\[ I = \frac{20}{10} = 2\ \text{A} \]
Final Answer:
When S is open, the current through the \(10\ \Omega\) resistor is \(0.5\) A. When S is closed, it rises to \(2\) A.
\[ \boxed{I_{\text{open}} = 0.5\ \text{A},\quad I_{\text{closed}} = 2\ \text{A}} \]