Question:

Explain the working of reverse biased configuration of a p-n junction diode. Drawing a graph between reverse voltage and reverse current, show the breakdown voltage.

Show Hint

Connect p to the negative terminal. The barrier grows, the depletion layer widens, and only a tiny minority-carrier current flows.
At the breakdown voltage (Zener or avalanche) the reverse current rises very sharply.
Updated On: Nov 19, 2026
Show Solution
collegedunia
Verified By Collegedunia

Solution and Explanation

Step 1: Understanding the Concept:
A p-n junction has a depletion layer with a built-in barrier potential \(V_0\) that stops majority carriers from crossing. Reverse bias means we connect the battery so that this barrier gets bigger.

Step 2: Reverse bias connection:
Join the p side to the negative terminal and the n side to the positive terminal of the battery. The applied voltage now adds to the barrier, so the total barrier becomes \(V_0 + V\).

Step 3: What happens inside:
Holes in the p side are pulled away from the junction toward the negative terminal. Electrons in the n side are pulled away toward the positive terminal. So the depletion layer widens.
No majority carrier can cross the higher barrier. But minority carriers (electrons in p, holes in n) are pushed across the junction by the same field.
This gives a very small current, the reverse saturation current. It is only a few microamperes (or less) because minority carriers are very few. It stays almost constant as the reverse voltage is raised, since it depends on how many minority carriers thermal energy makes, not on the voltage.

Step 4: Breakdown:
If the reverse voltage is raised high enough, the current suddenly shoots up at a voltage called the breakdown voltage \(V_{br}\). There are two causes.
Zener breakdown: in a heavily doped junction the depletion layer is very thin, so even a small voltage creates a huge field (about \(10^{6}\) V/m) that pulls electrons straight out of the bonds.
Avalanche breakdown: in a lightly doped junction, fast minority carriers knock out more electrons by collision, and the process multiplies like an avalanche.

Step 5: The graph (described in words):
Plot reverse voltage along the negative horizontal axis, in volts, and reverse current along the negative vertical axis, in microamperes (third quadrant).
From the origin the curve is almost flat, running along the voltage axis, because the reverse saturation current is tiny and constant. At the breakdown voltage \(V_{br}\) the curve turns sharply downward, which means the reverse current rises very rapidly. Mark this point on the reverse voltage axis as the breakdown voltage.

Final Answer:
In reverse bias the barrier grows and the depletion layer widens, so only a tiny reverse saturation current flows. At the breakdown voltage the reverse current rises suddenly, as shown on the reverse I-V graph. \[ \boxed{\text{Reverse bias: tiny constant current until breakdown voltage } V_{br}} \]
Was this answer helpful?
0
0