Question:

Explain the working of forward biased configuration of a p-n junction diode. Draw by making a graph between forward voltage and forward current, show the knee voltage.

Show Hint

Connect p to the positive terminal. The barrier falls, the depletion layer narrows, and majority carriers cross the junction.
The current is almost zero up to the knee voltage (0.7 V Si, 0.3 V Ge) and then rises steeply.
Updated On: Nov 19, 2026
Show Solution
collegedunia
Verified By Collegedunia

Solution and Explanation

Step 1: Understanding the Concept:
A p-n junction diode is a p-type crystal joined to an n-type crystal. At the joint, electrons from the n side and holes from the p side diffuse across and cancel. This leaves a thin depletion layer with fixed ions, and a barrier potential \(V_0\) (about 0.7 V for silicon and 0.3 V for germanium) that opposes further diffusion.

Step 2: Forward bias connection:
In forward bias the positive terminal of the battery is joined to the p side and the negative terminal to the n side, usually through a resistor that limits the current.
The battery voltage acts against the barrier potential. So the effective barrier becomes \(V_0 - V\), where \(V\) is the applied voltage.

Step 3: What happens inside:
The depletion layer becomes narrow, because the battery pushes holes and electrons toward the junction.
Holes from the p side and electrons from the n side cross the lowered barrier. After crossing, they become minority carriers on the opposite side and recombine there.
The battery keeps supplying electrons to the n side and removing electrons from the p side, so a steady forward current flows in the circuit.

Step 4: Behaviour of the current with voltage:
For a small forward voltage the barrier is still large, so only a few carriers cross and the current is almost zero. The voltage at which the current starts to rise sharply is the knee voltage (about 0.7 V for Si, 0.3 V for Ge).
Beyond the knee voltage the barrier is mostly cancelled, and the current rises very fast, roughly as \(I = I_0\left(e^{eV/kT} - 1\right)\). A small increase in voltage gives a large increase in current, so the series resistor is needed to protect the diode.

Step 5: The graph (described in words):
Plot forward voltage \(V\) in volts along the horizontal axis and forward current \(I\) in milliamperes along the vertical axis, in the first quadrant.
The curve starts at the origin and stays almost flat and close to the voltage axis for small \(V\). At the knee voltage \(V_k\) it bends upward and then climbs almost vertically. Mark the point on the voltage axis where this bend begins as the knee voltage \(V_k\).

Final Answer:
In forward bias the applied voltage lowers the barrier and narrows the depletion layer. Current is negligible below the knee voltage and rises steeply above it, as the I-V graph shows. \[ \boxed{\text{Forward bias: current rises sharply above knee voltage } V_k} \]
Was this answer helpful?
0
0