Step 1: Understanding the Concept:
In an AC circuit, the voltage and the current may not reach their peaks at the same moment. The angle between them is called the phase difference \(\phi\). This angle decides how much real power the circuit uses.
Step 2: Key Formula or Approach:
1. Average power: \(P = V_{rms} I_{rms}\cos\phi\).
2. For a series circuit, \(\cos\phi = \dfrac{R}{Z}\), where \(R\) is the resistance and \(Z\) is the impedance.
Step 3: Meaning of power factor:
The factor \(\cos\phi\) in the power formula is called the power factor.
\[ \text{Power factor} = \cos\phi = \frac{P}{V_{rms} I_{rms}} = \frac{R}{Z} \]
It is the fraction of the apparent power \(V_{rms} I_{rms}\) that is really used up in the circuit. Its value lies between 0 and 1. For a pure resistor \(\phi = 0\), so the power factor is 1. For a pure inductor or capacitor \(\phi = 90^{\circ}\), so the power factor is 0.
Step 4: Meaning of wattless current:
Split the current into two parts. The part \(I_{rms}\cos\phi\) is in phase with the voltage and does the real work. The other part \(I_{rms}\sin\phi\) is at \(90^{\circ}\) to the voltage.
The average power due to the part at \(90^{\circ}\) over a full cycle is \(V_{rms} I_{rms}\sin\phi\cos 90^{\circ} = 0\). So this component draws no net power and is called the wattless current (or idle current).
In a pure inductor or capacitor the whole current is wattless, because \(\phi = 90^{\circ}\). Energy goes into the field and comes back every cycle, so the average power is zero.
Final Answer:
Power factor is \(\cos\phi\), the fraction of the apparent power that does real work. Wattless current is the component of current at \(90^{\circ}\) to the voltage, which uses no average power.
\[ \boxed{P = V_{rms}I_{rms}\cos\phi} \]