Question:

Explain the energy bands in solids.

Show Hint

Atomic levels split into closely spaced levels when atoms come together in a solid, forming bands.
Name the valence band, the conduction band and the forbidden gap, and link the size of the gap to conductors, semiconductors and insulators.
Updated On: Nov 19, 2026
Show Solution
collegedunia
Verified By Collegedunia

Solution and Explanation

Step 1: Understanding the Concept:
An isolated atom has sharp, separate energy levels, and each level can hold only a fixed number of electrons. In a solid, about \(10^{28}\) atoms per cubic metre sit very close to each other, so the outer orbits of neighbouring atoms overlap.
The Pauli exclusion principle says no two electrons in the solid can share the same energy state. So every single atomic level has to split into a huge number of levels that lie extremely close together.

Step 2: How a band forms:
Because the split levels are crowded so tightly (the spacing is of the order of \(10^{-22}\) eV), they behave like a continuous strip of allowed energies. This strip is called an energy band.
Between two bands there can be a region of energies where no electron state exists. This region is called the forbidden energy gap, written \(E_g\).

Step 3: The important bands:
Valence band: the band formed by the outer (valence) electron levels. At absolute zero it is completely filled in an insulator or semiconductor.
Conduction band: the band just above the valence band. Electrons in it are free to move through the crystal and carry current.
Forbidden gap: the energy difference \(E_g = E_c - E_v\) between the bottom of the conduction band and the top of the valence band.

Step 4: Energy bands in conductors, insulators and semiconductors:
Picture the diagram with energy on the vertical axis. The valence band sits at the bottom, the conduction band above it, and the forbidden gap in between.
Conductor (metal): the conduction band is partly filled, or the valence and conduction bands overlap, so \(E_g = 0\) and electrons move freely.
Insulator: the gap is large, \(E_g > 3\) eV (diamond is about 5.4 eV). Thermal energy cannot lift electrons across, so the conduction band stays empty and no current flows.
Semiconductor: the gap is small, \(E_g < 3\) eV (silicon 1.1 eV, germanium 0.67 eV). At room temperature some electrons get enough energy to cross the gap, leaving holes behind in the valence band, so a small current flows.

Final Answer:
Energy bands are the continuous ranges of allowed electron energies that form when atomic levels split in a solid. They are the valence band, the forbidden gap and the conduction band, and the size of the gap decides whether the solid is a conductor, a semiconductor or an insulator. \[ \boxed{\text{Valence band} + \text{forbidden gap } E_g + \text{conduction band}} \]
Was this answer helpful?
0
0