Question:

Explain the depletion layer and potential barrier in the formation of p-n junction. How are both changing in the condition of forward biasing and reverse biasing ?

Show Hint

Diffusion leaves fixed ions at the junction, forming the depletion layer and barrier. Forward bias narrows it and lowers the barrier; reverse bias widens it and raises the barrier.
Updated On: Nov 19, 2026
Show Solution
collegedunia
Verified By Collegedunia

Solution and Explanation

Step 1: Understanding the Concept:
A p-n junction is made by joining a p-type semiconductor, which has many holes, to an n-type semiconductor, which has many free electrons. The two sides have very different carrier concentrations at the moment they touch, and this drives everything that follows.

Step 2: Formation of the depletion layer:
Electrons are plentiful on the n side and few on the p side, so electrons diffuse across the junction from n to p. In the same way holes diffuse from p to n.
An electron that crosses over combines with a hole near the junction. Both free carriers disappear.
Each electron that leaves an n-side donor atom leaves behind a fixed positive ion. Each hole that leaves a p-side acceptor atom leaves behind a fixed negative ion.
So a thin region on both sides of the junction has no free carriers and only fixed ions. This region is the depletion layer. Its width is of the order of \(10^{-6}\) m.

Step 3: Formation of the potential barrier:
The fixed positive ions on the n side and fixed negative ions on the p side set up an electric field pointing from n to p across the depletion layer. This field opposes further diffusion of electrons and holes.
The potential difference across the layer is called the barrier potential \(V_0\). It is about 0.7 V for silicon and about 0.3 V for germanium. Diffusion goes on until the field becomes strong enough to stop it, and then the junction is in equilibrium.

Step 4: Forward biasing:
Connect the p side to the positive terminal and the n side to the negative terminal of a battery of voltage \(V\). The applied field points opposite to the junction field.
The majority carriers are pushed toward the junction, and they enter the depletion layer. So the depletion layer becomes narrower.
The effective barrier falls from \(V_0\) to \((V_0 - V)\). Once \(V\) is greater than about 0.7 V for silicon, a large current flows, and it rises rapidly with voltage.

Step 5: Reverse biasing:
Connect the p side to the negative terminal and the n side to the positive terminal. Now the applied field points the same way as the junction field.
Holes and electrons are pulled away from the junction, so more fixed ions are uncovered and the depletion layer becomes wider.
The barrier rises to \((V_0 + V)\). Majority carriers cannot cross, and only a tiny current of minority carriers (the reverse saturation current, in microamperes) flows.

Final Answer:
Depletion layer: a region near the junction with no free carriers and only fixed ions. Potential barrier: the voltage across it, about 0.7 V for Si. In forward bias the layer narrows and the barrier falls to \(V_0 - V\). In reverse bias the layer widens and the barrier rises to \(V_0 + V\).
\[ \boxed{\text{Forward: width} \downarrow, \; V_0 - V; \quad \text{Reverse: width} \uparrow, \; V_0 + V} \]
Was this answer helpful?
0
0