>
Exams
>
Dairy and Food Engineering
>
Mass and Energy Balances Including Multiphase
>
draught 12 mm water column density of water 1000 k
Question:
Draught = 12 mm water column. Density of water = 1000 kg/m\(^3\).
Find pressure difference in Pa (round to 1 decimal).
Show Hint
Draught pressure = water-column height × density × gravity.
GATE AG - 2021
GATE AG
Updated On:
Dec 22, 2025
Show Solution
Verified By Collegedunia
Correct Answer:
117.1
Solution and Explanation
Convert height: \[ h = 12\ \text{mm} = 0.012\ \text{m} \] Pressure: \[ \Delta P = \rho g h = 1000 \times 9.81 \times 0.012 = 117.72\ \text{Pa} \] Rounded: \[ \boxed{117.7\ \text{Pa}} \]
Download Solution in PDF
Was this answer helpful?
0
0
Top GATE AG Dairy and Food Engineering Questions
The condition of refrigerant at the exit of the compressor in a vapor compression refrigeration system is:
GATE AG - 2025
Dairy and Food Engineering
Gas Refrigeration Cycle
View Solution
If the diameter of fat globule in a cream separator is reduced to half and the rotational speed of the centrifuge increased to three times, the terminal settling velocity of fat globule is:
GATE AG - 2023
Dairy and Food Engineering
Gas Refrigeration Cycle
View Solution
The lighter liquid layer and the interphase layer in a basket centrifuge, rotating at a speed of 1000 rpm, are 0.1025 m and 0.105 m away from the center, respectively. Considering the densities of lighter and heavier liquids as 920 kg/m\(^3\) and 1015 kg/m\(^3\), the differential pressure in horizontal direction required to maintain the interphase layer in kPa is \underline{\hspace{3cm}} (rounded off to 3 decimal places, \(\pi = 3.14\)).
GATE AG - 2023
Dairy and Food Engineering
Gas Refrigeration Cycle
View Solution
The upstream and downstream pressures in a homogenizer during homogenization of milk are maintained at 250 bar and 10 bar, respectively. If density of milk is 1030 kg/m\(^3\), then the velocity at which milk comes out of the homogenizing valve in m/s is \underline{\hspace{3cm}} (rounded off to 3 decimal places).
GATE AG - 2023
Dairy and Food Engineering
Gas Refrigeration Cycle
View Solution
The rotor shaft of an ice cream freezer consists of 3 scraper blades. The temperature difference between the ice cream mix and the refrigerant during freezing of ice cream is \(30^\circ C\). Density and latent heat of fusion of ice are 917 kg m\(^{-3}\) and 335 kJ kg\(^{-1}\), respectively. The overall heat transfer coefficient is 2000 kJ m\(^{-2}\) h\(^{-1}\) \(^{\circ}C^{-1}\). If the maximum thickness of ice formed before being scraped off is 10 μm, the minimum speed of the scraper shaft in rpm is:
GATE AG - 2023
Dairy and Food Engineering
Gas Refrigeration Cycle
View Solution
View More Questions
Top GATE AG Questions
If \(a\), \(b\), and \(c\) are the roots of \( 2x^3 - 3x^2 + px - 1 = 0 \) and the sum of two roots is 1, the value of \(p\) is:
GATE AG - 2025
Algebraic Methods of Solving a Pair of Linear Equations
View Solution
If the matrix
\[ \begin{pmatrix} x & -3 \\ 2 & x - 5 \end{pmatrix} \]
is singular, sum of the values of
\( x \)
is:
GATE AG - 2025
Matrices and Determinants
View Solution
The Laplace transform of \( \frac{s}{s^2 + a^2} \) is:
GATE AG - 2025
Laplace transforms
View Solution
The equation
\[ y'' + p(x)y' + q(x)y = r(x) \]
is a
_________
ordinary differential equation.
GATE AG - 2025
Differential Equations
View Solution
The median of the following set of numbers:
154, 130, 144, 137, 156, 146, 138, 149, 160, 138
is:
GATE AG - 2025
Statistics
View Solution
View More Questions