Step 1: Understanding the Concept:
A moving coil galvanometer detects small currents. The coil turns through an angle when current flows. Current sensitivity tells us how much the coil turns for each unit of current.
Step 2: Definition:
Current sensitivity is the deflection produced in the galvanometer per unit current through its coil. \[ I_s = \frac{\theta}{I} \]
Its unit is radian per ampere (or division per ampere).
Step 3: Find the formula:
A coil of \(N\) turns, area \(A\), carrying current \(I\) in a radial magnetic field \(B\), feels a deflecting torque \(\tau = NIAB\).
The suspension spring gives a restoring torque \(k\theta\), where \(k\) is the torsional constant. At equilibrium the two torques are equal. \[ NIAB = k\theta \]
So \[ I_s = \frac{\theta}{I} = \frac{NAB}{k} \]
Step 4: How to increase it:
From \(I_s = NAB/k\) we see what to change.
1. Increase the number of turns \(N\) of the coil.
2. Increase the area \(A\) of the coil.
3. Use a stronger magnetic field \(B\), for example a strong permanent magnet.
4. Decrease the torsional constant \(k\) by using a thin phosphor-bronze or quartz suspension wire.
Increasing \(N\) or \(A\) also increases the coil resistance, so the voltage sensitivity may not rise in the same way. That is a separate point from current sensitivity.
Final Answer:
Current sensitivity is the deflection per unit current, \(\theta/I = NAB/k\). It increases with more turns, bigger area, stronger field and a weaker suspension (smaller \(k\)).
\[ \boxed{I_s=\frac{\theta}{I}=\frac{NAB}{k}} \]