A signal $V_M = 5\sin(\pi t/3) V$ is applied to the circuit consisting of a switch S and capacitor $C = 0.1 \mu F$, as shown in the figure. The output $V_x$ of the circuit is fed to an ADC having an input impedance consisting of a $10 M\Omega$ resistance in parallel with a $0.1 \mu F$ capacitor. If S is opened at $t = 0.5 s$, the value of $V_x$ at $t = 1.5 s$ will be ________ V (rounded off to two decimal places).
Note: Assume all components are ideal.
Step 1: Determine the voltage across the capacitor $C$ at $t = 0.5 s$.
$V_M(0.5) = 5\sin(\pi \times 0.5 / 3) = 2.5 V$. $V_c(0.5^-) = 2.5 V$, and due to continuity, $V_c(0.5^+) = 2.5 V$.
Step 2: Determine the equivalent capacitance after the switch opens.
$C_{eq} = C + C_{ADC} = 0.1 \mu F + 0.1 \mu F = 0.2 \mu F$.
Step 3: Determine the discharge time constant.
$\tau = R_{ADC} C_{eq} = (10 \times 10^6) \times (0.2 \times 10^{-6}) = 2 s$.
Step 4: Write the voltage across the equivalent capacitance as a function of time for $t \ge 0.5 s$.
$V_x(t) = V_x(0.5) e^{-(t - 0.5) / \tau} = 2.5 e^{-(t - 0.5) / 2}$.
Step 5: Calculate $V_x$ at $t = 1.5 s$.
$V_x(1.5) = 2.5 e^{-(1.5 - 0.5) / 2} = 2.5 e^{-1 / 2} = 2.5 e^{-0.5} \approx 2.5 \times 0.6065 = 1.51625 V$.
Step 6: Round off to two decimal places.
$V_x(1.5) \approx 1.52 V$.
The circuit shown in Figure (a) can be represented using its equivalent T-model as shown in Figure (b). The values of the inductances $L_1$, $L_2$, and $L_3$ in the equivalent T-model are

The clock frequency of the digital circuit shown in the figure is 12 MHz. The frequencies of the output (F) corresponding to Control = 0 and Control = 1, respectively, are

The bridge circuit, shown in Figure (a), can be equivalently represented using the circuit shown in Figure (b). The values of $R_1$, $R_2$, and $V_C$ in the equivalent circuit are

The circuit shown in Figure (a) can be represented using its equivalent T-model as shown in Figure (b). The values of the inductances $L_1$, $L_2$, and $L_3$ in the equivalent T-model are

The clock frequency of the digital circuit shown in the figure is 12 MHz. The frequencies of the output (F) corresponding to Control = 0 and Control = 1, respectively, are

The bridge circuit, shown in Figure (a), can be equivalently represented using the circuit shown in Figure (b). The values of $R_1$, $R_2$, and $V_C$ in the equivalent circuit are

Despite his initial hesitation, Rehman’s ____________ to contribute to the success of the project never wavered.
Select the most appropriate option to complete the above sentence.
Bird : Nest :: Bee : __________
Select the correct option to complete the analogy.
The paper as shown in the figure is folded to make a cube where each square corresponds to a particular face of the cube. Which one of the following options correctly represents the cube? Note: The figures shown are representative.
