List of top Dairy Technology Questions asked in ICAR AIEEA (PG)

Helical and ribbon type of agitators are used for mixing the material having viscosity in the range of
To place more records on data base file in dbaseIII+, the command used is
In Lotus 1-2-3 the spread sheet has
The discharge through a single acting reciprocating pump is
A 3 metre diameter cyclone handles an air flow rate of 35000 kg/hr. The average air temperature over the cyclone is 80$^{\circ}$C. The barometer stands at 758 mm Hg. Calculate the pressure drop.
The ratio of inertia force to viscous force, is known as
Rotameter is used for measuring
The temperature dependence of the diffusivity can generally be described by
A 100 mm plate type disc is atomizing 5 kg/min of skim milk at 15,000 rpm. What is the disc peripheral velocity?
The atmospheric pressure head of water column is ____\.
A metal wire having length of 2.0 m is elongated by 2 mm under a load. The initial diameter of the wire is 2 mm. Find the change in diameter of wire after elongation if poisons ratio is 0.2.
Two shafts are said to have equal strength, if:
The Poisson’s ratio ($\mu$) is of order
When a helical compression spring is cut into two halves, the stiffness of each of the resulting springs will be
Kinematic viscosity can be defined as
At what velocity does water flow convert from laminar to transitional in a 25 mm diameter pipe at 25$^\circ$C? The density of water is 997 kg/m$^3$ and viscosity is 1 x 10$^{-3}$ kg/m.s}
How much water should be evaporated from 1 kg milk of 9% concentration in order to form a 36% solution?
Read the following statements.
A. Lower relative humidity results in a greater difference between the dry-bulb and wet-bulb temperatures.
B. Increase in sensible heat increases the relative humidity
C. Adiabatic dehumidification leads to increase in dry bulb temperature
Choose the correct statement from the options given below:
In Seven-effect evaporator with a thermo-compressor, which of the following is possible to evaporate?
Calculate the pump head if suction pressure is 4 bar and discharge pressure is 6 bar. Consider density of water as 997 kg/m$^3$
What is the minimum duration required for curing of cement concrete for attaining good strength?
Which of the following is a naturally available latent heat storage material for refrigeration?
In an air conditioned room, the velocity of air can be measured using which of the following instruments?
Evaluate the COP of a refrigeration system having work input of 120 kJ/kg and refrigeration effect generated is 300 kJ/kg
According to the Bureau of Indian Standards (IS: 1397, 1990), Kraft paper of Grade 2 quality is made from