>
questions
List of practice Questions
The physical principle used for the derivation of momentum equation is
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Fluid flow
The lifting flow over circular cylinder is obtained by the combination of
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
Which of the following is usually measured as the angle between the line of 25% chord and a perpendicular to the root chord?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
Winglets are used to reduce
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Aircraft Configurations
When a nozzle is said to be over expanded?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Fundamentals of Supersonic Flows
For a flow a Prandtl-Meyer expansion wave is
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Fundamentals of Supersonic Flows
Which of the following is a barotropic flow?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Fundamentals of Supersonic Flows
The schadowgraph flow visualization technique depends on
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
Flow separation is due to
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
The semi-span of a rectangular wing of plan form area 8.4 m² is 3.5 m. The aspect ratio of the wing is
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Aircraft Configurations
What is the center pressure if the lift coefficient and lift curve slope of an aerofoil of percentage camber 0.6 are 1.02 and 2, respectively?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
Consider an infinitely thin flat plate at an angle of attack of \(5^\circ\) in a Mach 2.3 flow. Pressure is 101 kPa. The lift coefficient as per shock expansion theory is
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Hypersonic Air-Breathing Propulsion
Aerodynamic center is defined as point on the airfoil at which
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
What is the Coefficient of pressure, where velocity at the surface of the cylinder is equal to free stream velocity?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
Which of the following states that the time rate of change of circulation around a closed curve consisting of the same fluid elements is zero?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Fluid flow
For calorically perfect gas, specific heats \(C_p\) and \(C_v\) are
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Heat Transfer
The free stream Mach number for which the entire flow around the body is subsonic is called
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
When airfoil thickness decreases, the critical Mach number
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
What is the purpose of supercritical airfoil?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Airfoil Theory
A turbojet powered aircraft is suitable for which of the following type of applications?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Aircraft Configurations
For which of these applications is the turbo shaft engine most suited?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Aircraft Configurations
In the subcritical operation mode of a supersonic inlet, shock strands
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Hypersonic Air-Breathing Propulsion
Ram efficiency is defined as
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Heat Transfer
The combustion in a gas turbine is a
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Gas Turbines
What is the purpose of a fuel injection system in the combustor?
TANCET - 2024
TANCET
Aeronautical and Aerospace Engineering
Gas Turbines
Prev
1
...
3718
3719
3720
3721
3722
...
9046
Next