List of top Dairy Technology Questions

The part of HTST pasteurizer that limits its application with respect to temperature is
Among the following parameters HTST pasteurizer instrumentation, one that is not a controlling operation
Ductility of a material is defined as the ability of material to
Forced convection in a liquid bath is caused by
The decimal reduction time 'D' is defined as the time necessary for reduction in the microbial population by
In a dairy plant, after processing rasogolla is usually kept in containers. It is necessary to mathematically estimate the number of spoiled containers. The parameter that is used is called
The ratio of shear stress to the shear strain is called
A composite slab of unit area is made up of three material layers having thickness (x) and thermal conductivities (k) as (x1, k1), (x2, k2), and (x3, k3) respectively. Its thermal resistance (Rt) would be,
When the relative humidity of air reaches 100%, the 'Wet bulb temperature' becomes
The heating of gas at constant pressure is governed by
Provision of fins on a heat transfer surface will be more effective if the number and size of fins are
Excess insulation thickness for a steam pipeline will affect the heat loss due to change in
The optimum thickness of insulation of steam pipe line is
Match List I with List II
Choose the correct answer from the options given below:
Match List I with List II
Choose the correct answer from the options given below:
Match List I with List II
Choose the correct answer from the options given below:
If 'mg' is mass of dry steam and 'mf' is mass of water in suspension, then dryness fraction of steam is equal to
If the value of n = 0 in the general law pv^n = C, then the process is called
Which of the following is used as refrigerant in cryogenic freezing?
The nozzles of pressure nozzle atomizers are made of the following material
The separation efficiency of cyclone separator is inversely related to its
Match List I with List II
Choose the correct answer from the options given below:
Match List I with List II
Choose the correct answer from the options given below:
Which of the following is an example of ethylene absorber?
Maximum possible overrun in butter is