Which of the following logging tool(s) underestimate(s) porosity in a gas-bearing formation?
Show Hint
- Neutron log
- Nuclear Magnetic Resonance (NMR) log
- Sonic log
- Density log
The Correct Option is A, D
Solution and Explanation
Step 1: Neutron log.
- Neutron logs measure hydrogen concentration. - In gas zones, hydrogen index is lower compared to liquid-filled porosity. - Hence, neutron logs underestimate porosity in gas-bearing formations.
Step 2: Density log.
- Density log measures electron density, which is lower for gas compared to liquid. - This makes the log read lower bulk density, leading to underestimated porosity.
Step 3: Sonic log.
- Sonic log measures travel time of acoustic waves. - Gas affects compressibility but does not cause systematic underestimation of porosity.
Step 4: NMR log.
- NMR directly measures pore fluids via relaxation times. - It can distinguish between gas and liquid-filled pores, so it does not underestimate porosity in gas zones.
Final Answer: \[ \boxed{\text{Neutron log and Density log (A and D)}} \]
Top Questions on Reservoir and channel routing
- Log-log plot of pressure drop (\( \Delta p \)) versus time (\( t \)) obtained using well test data is matched with one of the Grigarten type curves. Thereafter, a point on the type curve is chosen with \( P_d = 10 \) and \( t_d/C_d = 100 \), where \( P_d, t_d, C_d \) are dimensionless pressure, dimensionless time, and dimensionless wellbore storage, respectively.
The corresponding match point on the log-log plot is \( \Delta p = 250 \) psi and \( t = 10 \) hrs. Oil flow rate is 500 rb/day. Viscosity of oil is 1.5 cP. Thickness of the reservoir is 10 ft and formation volume factor of oil is 1.2 rb/stb.
The permeability of the reservoir is .......... mD (rounded off to one decimal place).
- GATE PE - 2025
- Reservoir Engineering
- Reservoir and channel routing
- An isotropic and homogeneous oil reservoir has a porosity of 20%, thickness of 20 ft, and total compressibility of \( 15 \times 10^{-6} \) psi\(^{-1}\). Variation of flowing bottomhole pressure (\( p_{{wf}} \)) with time (\( t \)) under pseudo steady state of a drawdown test in the well (under radial flow condition) is given as
\[ p_{{wf}} = 2850 - 5t \] The pressure is in psi and time is in hours. During the well test, the oil flow rate is 1800 rb/day.
The drainage area of the reservoir is .......... acres (rounded off to two decimal places).
- GATE PE - 2025
- Reservoir Engineering
- Reservoir and channel routing
- A production tubing string of length 1500 m is tightly held by packers to prevent any expansion in either direction. Production of hot gases from the reservoir increases the temperature of the tubing by 20°C. The Young’s modulus of elasticity of the tubing material is 3000 N/m², and the linear coefficient of thermal expansion is \( 5 \times 10^{-6} \) per °C.
Assuming no radial expansion, and neglecting the weight of the gas in the tubing and its viscosity, the increase in the stress of the tubing due to temperature rise is .......... N/m² (rounded off to two decimal places).
- GATE PE - 2025
- Reservoir Engineering
- Reservoir and channel routing
The drainage oil–water capillary pressure data for a core retrieved from a homogeneous isotropic reservoir is listed in the table below. The reservoir top is at 4000 ft from the surface and the water–oil contact (WOC) depth is at 4100 ft.
Water Saturation (%) Capillary Pressure (psi) 100.0 0.0 100.0 5.5 100.0 5.6 89.2 6.0 81.8 6.9 44.2 11.2 29.7 17.1 25.1 36.0
Assume the densities of water and oil at reservoir conditions are 1.04 g/cc and 0.84 g/cc, respectively. The acceleration due to gravity is 980 m/s². The interfacial tension between oil and water is 35 dynes/cm and the contact angle is 0°.
The depth of free-water level (FWL) is __________ ft (rounded off to one decimal place).- GATE PE - 2025
- Reservoir Engineering
- Reservoir and channel routing
- Natural gas is produced at a flow rate of 2 MMscf/day at the wellhead having temperature and pressure of 560 °R and 200 psi, respectively. The apparent molecular weight and the compressibility factor (z) of the gas are estimated to be 20 g/g-mole and 0.8, respectively, at wellhead conditions. The gas formation volume factor (\( B_g \)) at the wellhead condition is ........... × \( 10^{-2} \) ft\(^3\)/scf (rounded off to one decimal place).
- GATE PE - 2025
- Reservoir Engineering
- Reservoir and channel routing
Questions Asked in GATE PE exam
- Classification of kerogen is based on the relative amount of Carbon (C), Hydrogen (H) and Oxygen (O). Which ONE of the following options is CORRECT about Type II kerogen?
- GATE PE - 2026
- Geochemistry
- Which of the following option(s) is/are CORRECT for well testing analysis of a reservoir?
- GATE PE - 2026
- Reservoir capacity
- In a capillary rise experiment with a capillary tube of length $l_1$, water rises to a height $h$ such that $h<l_1$. If the capillary tube is cut to a length $l_2$ such that $l_2<h$, and the experiment is repeated, which of the following statements is/are CORRECT?
- GATE PE - 2026
- Petroleum Exploration and Drilling Engineering
- The porosity of a formation with matrix density of 2.65 g/cc and fluid density of 1.0 g/cc is 0.15. The formation has shear modulus of 30 GPa and bulk modulus of 36 GPa. The compressional wave velocity in the formation is _________ $\times 10^3$ m/s (rounded off to two decimal places).
- GATE PE - 2026
- Rock Physics
- A vertical well is drilled up to a depth of 4000 ft. Further drilling starts with 10 ppg of fresh mud and 50000 lbf weight on bit (WOB). An equivalent circulation density (ECD) of 10.75 ppg was recorded. The total circulation pressure loss is estimated to be 110 psi. The steel density is 65.5 ppg. The decrease in hook load is _________ lbf (rounded off to one decimal place). (Note: 1 ppg mud is equivalent to 0.052 psi/ft.)
- GATE PE - 2026
- Petroleum Exploration and Drilling Engineering