Molarity of \(KCl\) solution \(= 0.1\) M
Resistance \(=\) \(1750\ Ω\)
Conductivity \(= 0.152×10^{–3}\) S cm–1
Conductivity \(= \frac {\text {Cell\ constant}}{\text{Resistance}}\)
∴ Cell constant \(= 0.152×10^{–3}×1750 \)
\(= 266×10^{–3}\) cm–1
So, the answer is \(266\).
Rods $x$ and $y$ of equal dimensions but of different materials are joined as shown in figure. Temperatures of end points $A$ and $F$ are maintained at $100^\circ$C and $40^\circ$C respectively. Given the thermal conductivity of rod $x$ is three times of that of rod $y$, the temperature at junction points $B$ and $E$ are (close to): 
Given below are two statements:
Statement I: Mohr's salt is composed of only three types of ions—ferrous, ammonium, and sulphate.
Statement II: If the molar conductance at infinite dilution of ferrous, ammonium, and sulphate ions are $ x_1 $, $ x_2 $, and $ x_3 $ $ \text{S cm}^2 \, \text{mol}^{-1} $, respectively, then the molar conductance for Mohr's salt solution at infinite dilution would be given by $ x_1 + x_2 + 2x_3 $.
A substance 'X' (1.5 g) dissolved in 150 g of a solvent 'Y' (molar mass = 300 g mol$^{-1}$) led to an elevation of the boiling point by 0.5 K. The relative lowering in the vapour pressure of the solvent 'Y' is $____________ \(\times 10^{-2}\). (nearest integer)
[Given : $K_{b}$ of the solvent = 5.0 K kg mol$^{-1}$]
Assume the solution to be dilute and no association or dissociation of X takes place in solution.
Inductance of a coil with \(10^4\) turns is \(10\,\text{mH}\) and it is connected to a DC source of \(10\,\text{V}\) with internal resistance \(10\,\Omega\). The energy density in the inductor when the current reaches \( \left(\frac{1}{e}\right) \) of its maximum value is \[ \alpha \pi \times \frac{1}{e^2}\ \text{J m}^{-3}. \] The value of \( \alpha \) is _________.
\[ (\mu_0 = 4\pi \times 10^{-7}\ \text{TmA}^{-1}) \]
An electrochemical cell is a device that is used to create electrical energy through the chemical reactions which are involved in it. The electrical energy supplied to electrochemical cells is used to smooth the chemical reactions. In the electrochemical cell, the involved devices have the ability to convert the chemical energy to electrical energy or vice-versa.