Question:
The phases present in pearlite are
The phases present in pearlite are
Updated On: Jan 31, 2026
- austenite and ferrite
- cementite and austenite
- ferrite and cementite
- martensite and ferrite
Show Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
The correct option is (C): ferrite and cementite
Was this answer helpful?
0
0
Top GATE Applied Mechanics and Design Questions
- A massive uniform rigid circular disc is mounted on a frictionless bearing at the end E of a massive uniform rigid shaft AE which is suspended horizontally in a uniform gravitational field by two identical light inextensible strings AB and CD as shown, where G is the center of mass of the shaft-disc assembly and g is the acceleration due to gravity. The disc is then given a rapid spin $\omega$ about its axis in the positive x-axis direction as shown, while the shaft remains at rest. The direction of rotation is defined using the right-hand thumb rule. If the string AB is suddenly cut, assuming negligible energy dissipation, the shaft AE will
- A structural member under loading has a uniform state of plane stress which in usual notations is given by $\sigma_x = 3P$, $\sigma_y = -2P$ and $\tau_{xy} = \sqrt{2}\,P$, where $P>0$. The yield strength of the material is 350 MPa. If the member is designed using the maximum distortion energy theory, then the value of $P$ at which yielding starts (according to the maximum distortion energy theory) is
- A square plate is supported in four different ways (configurations (P) to (S) as shown in the figure). A couple moment $C$ is applied on the plate. Assume all the members to be rigid and mass-less, and all joints to be frictionless. All support links of the plate are identical. The square plate can remain in equilibrium in its initial state for which one or more of the following support configurations?
- A rope with two mass–less platforms passes over a fixed pulley. Each disc weighs 20 N. For $n=5$ and $m=0$, a downward force $F = 200$ N applied on the right platform (figure (i)) is just sufficient to initiate upward motion of the left platform. If the force $F$ is removed (figure (ii)), the minimum value of $m$ required to prevent downward motion of the left platform is ______________ (in integer).
- A rigid homogeneous uniform block of mass 1 kg, height $h = 0.4$ m and width $b = 0.3$ m is pinned at one corner and placed upright in a uniform gravitational field ($g = 9.81$ m/s$^2$), supported by a roller as shown. A short duration impulsive force $F$, producing an impulse $I_F$, is applied at a height $d = 0.3$ m from the bottom. Assume all joints to be frictionless. The minimum value of $I_F$ required to topple the block is ________________.
View More Questions
Top GATE Free-body diagrams and equilibrium Questions
- A square plate is supported in four different ways (configurations (P) to (S) as shown in the figure). A couple moment $C$ is applied on the plate. Assume all the members to be rigid and mass-less, and all joints to be frictionless. All support links of the plate are identical. The square plate can remain in equilibrium in its initial state for which one or more of the following support configurations?
- A rigid beam AD of length $3a = 6$ m is hinged at A and supported by two strings as shown. A force $F = 9$ kN is applied at C. Assuming small deflection and linear elastic strings, the tension in the string at C is __________ kN (round off to 2 decimal places).
A block of negligible mass rests on a surface that is inclined at 30° to the horizontal plane as shown in the figure. When a vertical force of 900 N and a horizontal force of 750 N are applied, the block is just about to slide.
The coefficient of static friction between the block and surface is \(\underline{\hspace{2cm}}\) (round off to two decimal places).
- A rigid massless tetrahedron is placed such that vertex O is at the origin and the other three vertices A, B, and C lie on the coordinate axes as shown in the figure. The body is acted on by three point loads, of which one is acting at A along x-axis and another at point B along y-axis. For the body to be in equilibrium, the third point load acting at point O must be
Top GATE Questions
- “I have not yet decided what I will do this evening; I ______ visit a friend.”
- Eject : Insert : : Advance : _______ (By word meaning)
- What are the number of numbers possible divisible by 3 if we choose 4 numbers from the set S = {4,5,7,8,9}
- Let \(A\) and \(B\) be real symmetric matrices of the same size. Which one of the following options is correct?
- Air inside a rigid, thermally-insulated tank undergoes stirring as shown in the figure below. Which one of the following options is correct?
\includegraphics[width=0.5\linewidth]{18.png}
View More Questions