Question:
The most suitable electrode material used for joining low alloy steels using Gas Metal Arc Welding (GMAW) process is
The most suitable electrode material used for joining low alloy steels using Gas Metal Arc Welding (GMAW) process is
Updated On: Jan 31, 2026
- copper
- cadmium
- low alloy steel
- tungsten
Show Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
The correct option is (C): low alloy steel
Was this answer helpful?
0
0
Top GATE Materials, Manufacturing & Industrial Engineering Questions
- Which one of the following is the definition of ultimate tensile strength (UTS) obtained from a stress-strain test on a metal specimen?
- Fluidity of a molten alloy during sand casting depends on its solidification range. The phase diagram of a hypothetical binary alloy of components A and B is shown in the figure with its eutectic composition and temperature. All the lines in this phase diagram, including the solidus and liquidus lines, are straight lines. If this binary alloy with 15 weight % of B is poured into a mould at a pouring temperature of 800\,$^\circ$C, then the solidification range is ________________.
- A shaft of diameter \(25^{-0.04}_{-0.07}\) mm is assembled in a hole of diameter \(25^{+0.02}_{+0.00}\) mm. Match the allowance and limit parameter in Column I with its corresponding quantitative value in Column II for this shaft–hole assembly.
- Match the additive manufacturing technique in Column I with its corresponding input material in Column II.
- Which one of the following CANNOT impart linear motion in a CNC machine?
View More Questions
Top GATE Principles of welding, brazing, soldering and adhesive bonding Questions
- Which of these processes involve(s) melting in metallic workpieces?
- In a DC arc welding process, open-circuit voltage is 100 V and short-circuit current is 1000 A. Arc voltage varies as $V = 10 + 5l$, where $l$ is arc length in mm. The maximum available arc power during the process is ____________ kVA (in integer).
- A spot welding operation performed on two pieces of steel yielded a nugget with a diameter of 5 mm and a thickness of 1 mm. The welding time was 0.1 s. The melting energy for the steel is 20 J/mm³. Assuming the heat conversion efficiency as 10%, the power required for performing the spot welding operation is \(\underline{\hspace{1cm}}\) kW (round off to two decimal places).
- In an arc welding process, the voltage and current are 30V and 200A, respectively. The cross-sectional area of the joint is 20 mm2 and the welding speed is 5mm/s. The heat required to melt the material is 20 J/s. The percentage of heat lost to the surrounding during the welding process is ____(rounded off to 2 decimal places).
- A flat surface of a C60 steel having dimensions of 100mm (length) x 200mm (width) is produced by a HSS slab mill cutter. The 8-toothed cutter has 100mm diameter and 200mm width. The feed per tooth is 0.1mm, cutting velocity is 20m/min and depth of cut is 2mm. The machining time required to remove the entire stock is _____minutes (rounded off to 2 decimal places).
Top GATE Questions
- “I have not yet decided what I will do this evening; I ______ visit a friend.”
- Eject : Insert : : Advance : _______ (By word meaning)
- What are the number of numbers possible divisible by 3 if we choose 4 numbers from the set S = {4,5,7,8,9}
- Let \(A\) and \(B\) be real symmetric matrices of the same size. Which one of the following options is correct?
- Air inside a rigid, thermally-insulated tank undergoes stirring as shown in the figure below. Which one of the following options is correct?
\includegraphics[width=0.5\linewidth]{18.png}
View More Questions