Question:
The machining process that involves ablation is
The machining process that involves ablation is
Show Hint
Laser beam machining is a type of non-traditional machining process that removes material using the heat generated by a focused laser beam.
Updated On: Dec 20, 2025
- Abrasive Jet Machining
- Chemical Machining
- Electrochemical Machining
- Laser Beam Machining
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Ablation refers to the process of material removal from a surface due to the energy imparted by a focused energy source.
Laser Beam Machining (LBM) uses a high-energy laser beam to vaporize material from the workpiece, which is a typical ablation process.
Thus, the correct answer is (D).
Thus, the correct answer is (D).
Was this answer helpful?
0
0
Top Questions on Principles of non-traditional machining processes
- A set of jobs U, V, W, X, Y, Z arrive at time t = 0 to a production line consisting of two workstations in series. Each job must be processed by both workstations in sequence (i.e., the first followed by the second). The process times (in minutes) for each job on each workstation in the production line are given below.
Job U V W X Y Z Workstation 1 5 7 3 4 6 8 Workstation 2 4 6 6 8 5 7
The sequence in which the jobs must be processed by the production line if the total makespan of production is to be minimized is- GATE ME - 2024
- Materials, Manufacturing & Industrial Engineering
- Principles of non-traditional machining processes
Questions Asked in GATE exam
- The welding process commonly used for fabricating tailor-welded blanks of dissimilar thickness for automotive applications is
- GATE ME - 2026
- Manufacturing Technology
- Let A and B be real symmetric matrices of same size. Which one of the following options is correct?
- GATE ME - 2026
- Calculus
- A plate of 30 mm thickness is fed through a rolling mill with two powered rolls. Each roll has a diameter of 500 mm. The plate thickness is to be reduced to 27 mm in a single pass. Assume no change in width. The process feasibility and the maximum draft (in mm) can be represented, respectively, as
Use the coefficient of friction as 0.12- GATE ME - 2026
- Manufacturing Technology
- Two metal parts (a cylinder and a cube) of same volume are cast under identical conditions. The diameter of the cylinder is equal to its height. The ratio of the solidification time of the cube to that of the cylinder is _______________ (rounded off to 2 decimal places).
Assume that solidification time follows Chvorinov's rule with an exponent of 2.
- GATE ME - 2026
- Manufacturing Technology
- A cantilever beam of length \(L\) is fixed at the left end (\(x=0\)). It is subjected to a concentrated downward point load \(P\) and a concentrated clockwise moment \(M = \frac{PL}{2}\) at the midpoint (\(x = L/2\)). Which of the following descriptions correctly represents the Shear Force Diagram (SFD) for the beam?
- GATE ME - 2026
- Manufacturing Technology
View More Questions