Question:
The "Earing" phenomenon in metal forming is associated with
The "Earing" phenomenon in metal forming is associated with
Updated On: Jan 31, 2026
- deep drawing
- rolling
- extrusion
- forging
Show Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): deep drawing
Was this answer helpful?
0
0
Top GATE Materials, Manufacturing & Industrial Engineering Questions
- Which one of the following is the definition of ultimate tensile strength (UTS) obtained from a stress-strain test on a metal specimen?
- Fluidity of a molten alloy during sand casting depends on its solidification range. The phase diagram of a hypothetical binary alloy of components A and B is shown in the figure with its eutectic composition and temperature. All the lines in this phase diagram, including the solidus and liquidus lines, are straight lines. If this binary alloy with 15 weight % of B is poured into a mould at a pouring temperature of 800\,$^\circ$C, then the solidification range is ________________.
- A shaft of diameter \(25^{-0.04}_{-0.07}\) mm is assembled in a hole of diameter \(25^{+0.02}_{+0.00}\) mm. Match the allowance and limit parameter in Column I with its corresponding quantitative value in Column II for this shaft–hole assembly.
- Match the additive manufacturing technique in Column I with its corresponding input material in Column II.
- Which one of the following CANNOT impart linear motion in a CNC machine?
View More Questions
Top GATE Metal forming processes Questions
The thickness, width and length of a metal slab are 50 mm, 250 mm and 3600 mm, respectively. A rolling operation on this slab reduces the thickness by 10% and increases the width by 3%. The length of the rolled slab is \(\underline{\hspace{2cm}}\) mm (round off to one decimal place).
- A cutting tool provides a tool life of 60 minutes while machining with the cutting speed of 60 m/min. When the same tool is used for machining the same material, it provides a tool life of 10 minutes for a cutting speed of 100 m/min. If the cutting speed is changed to 80 m/min for the same tool and work material combination, the tool life computed using Taylor's tool life model is ____minutes (rounded off to 2 decimal places).
- A blanking operation is performed on C20 steel sheet to obtain a circular disc having a diameter of 20 mm and a thickness of 2 mm. An allowance of 0.04 is provided. The punch size used for the operation is _____mm (rounded off to 2 decimal places).
Top GATE Questions
- “I have not yet decided what I will do this evening; I ______ visit a friend.”
- Eject : Insert : : Advance : _______ (By word meaning)
- What are the number of numbers possible divisible by 3 if we choose 4 numbers from the set S = {4,5,7,8,9}
- Let \(A\) and \(B\) be real symmetric matrices of the same size. Which one of the following options is correct?
- Air inside a rigid, thermally-insulated tank undergoes stirring as shown in the figure below. Which one of the following options is correct?
\includegraphics[width=0.5\linewidth]{18.png}
View More Questions