Question:

The 3D figure shows the view of an object. Looking in the direction of arrow, identify the most appropriate elevation from the given answer figures.

Show Hint

Project the object onto a vertical plane perpendicular to the arrow: the width comes from the long edge, the height from the vertical edges, and the slot and the two front boxes show up as rectangles.
Updated On: Nov 12, 2026
Show Solution
collegedunia
Verified By Collegedunia

The Correct Option is B

Solution and Explanation

The arrow points along the short horizontal axis of the object, so the elevation shows the long side (about 4 units wide) and the height (about 3.5 units); the elevation must therefore be a landscape rectangle, which rules out options (1) and (4), the tall portrait shapes.
The object is a block with a rectangular slot cut down from the top, about half the width of the block (roughly 2 of the 4 units) and reaching a little more than half the height.
Two small cubes project from the front at the two lower corners; in the elevation each appears as a square box at the bottom left and bottom right, about one unit high, leaving the middle of the lower part plain.
Option (3) adds an extra horizontal line that splits the middle part below the slot, which does not exist on the object. Option (2) shows the slot as a clean rectangle from the top, a plain middle part and the two corner boxes.
Answer: (2) the landscape elevation with the central top slot and two corner boxes
Was this answer helpful?
0
0