A temperature difference can generate e.m.f. in some materials. Let $ S $ be the e.m.f. produced per unit temperature difference between the ends of a wire, $ \sigma $ the electrical conductivity and $ \kappa $ the thermal conductivity of the material of the wire. Taking $ M, L, T, I $ and $ K $ as dimensions of mass, length, time, current and temperature, respectively, the dimensional formula of the quantity $ Z = \frac{S^2 \sigma}{\kappa} $ is:
An ideal monatomic gas of $ n $ moles is taken through a cycle $ WXYZW $ consisting of consecutive adiabatic and isobaric quasi-static processes, as shown in the schematic $ V-T $ diagram. The volume of the gas at $ W, X $ and $ Y $ points are, $ 64 \, \text{cm}^3 $, $ 125 \, \text{cm}^3 $ and $ 250 \, \text{cm}^3 $, respectively. If the absolute temperature of the gas $ T_W $ at the point $ W $ is such that $ n R T_W = 1 \, J $ ($ R $ is the universal gas constant), then the amount of heat absorbed (in J) by the gas along the path $ XY $ is 
Two co-axial conducting cylinders of same length $ \ell $ with radii $ \sqrt{2}R $ and $ 2R $ are kept, as shown in Fig. 1. The charge on the inner cylinder is $ Q $ and the outer cylinder is grounded. The annular region between the cylinders is filled with a material of dielectric constant $ \kappa = 5 $. Consider an imaginary plane of the same length $ \ell $ at a distance $ R $ from the common axis of the cylinders. This plane is parallel to the axis of the cylinders. Ignoring edge effects, the flux of the electric field through the plane is $ (\varepsilon_0 \text{ is the permittivity of free space}) $:
List-I shows four configurations, each consisting of a pair of ideal electric dipoles. Each dipole has a dipole moment of magnitude $ p $, oriented as marked by arrows in the figures. In all the configurations the dipoles are fixed such that they are at a distance $ 2r $ apart along the $ x $-direction. The midpoint of the line joining the two dipoles is $ X $. The possible resultant electric fields $ \vec{E} $ at $ X $ are given in List-II. Choose the option that describes the correct match between the entries in List-I to those in List-II. 
A container has a base of 50 cm × 5 cm and height 50 cm, as shown in the figure. It has two parallel electrically conducting walls each of area 50 cm × 50 cm. The remaining walls of the container are thin and non-conducting. The container is being filled with a liquid of dielectric constant 3 at a uniform rate of 250 cm3s−1. What is the value of the capacitance of the container after 10 seconds? [Given: Permittivity of free space 𝜖0 = 9 × 10−12 C2N−1m−2, the effects of the non-conducting walls on the capacitance are negligible]
Monocyclic compounds $ P, Q, R $ and $ S $ are the major products formed in the reaction sequences given below.
The product having the highest number of unsaturated carbon atom(s) is:
For the reaction sequence given below, the correct statement(s) is(are): 
Consider a reaction $ A + R \rightarrow Product $. The rate of this reaction is measured to be $ k[A][R] $. At the start of the reaction, the concentration of $ R $, $[R]_0$, is 10-times the concentration of $ A $, $[A]_0$. The reaction can be considered to be a pseudo first order reaction with assumption that $ k[R] = k' $ is constant. Due to this assumption, the relative error (in %) in the rate when this reaction is 40% complete, is ____. [$k$ and $k'$ represent corresponding rate constants]