Present road side waste containers are normally dirty, stinking and spilling over. Design waste container bin(s) to be used in public places for segregation of the following categories of waste:
(a) Different types of packaging
(b) Wet and Dry organic waste
(c) Organic food waste
(d) All other kinds of leftover.
(a) Different types of packaging
(b) Wet and Dry organic waste
(c) Organic food waste
(d) All other kinds of leftover.
Show Hint
Solution and Explanation
Step 1: Understand the problem.
The waste containers need to be designed with features that will allow them to store and segregate different categories of waste. These bins should be rugged and movable to allow easy transportation for disposal.
Step 2: Design considerations.
- Containers should be compartmentalized to separate different waste types: packaging, organic waste, food waste, and other leftovers.
- Each bin must be clearly labeled for specific waste types, making it easy for people to use.
- The design must prevent waste from spilling over, with secure lids or covers for waste containment.
- The container should have wheels for easy movement to the disposal site.
- Materials should be durable, weather-resistant, and easy to clean to maintain hygiene and avoid odor buildup. Final Answer: Design the container(s) to be rugged and movable so that the waste can be transported for disposal. 
Top CEED Design Aptitude Questions
The words given below are written using a particular font. Identify the digit that does not belong to the same font.
Shown below is a cross-section which is revolved 270 degrees around the P-Q axis to create a solid. How many surfaces will the resultant solid have?
Shown below is a strip of paper which is folded multiple times. How many red pawns are placed on the same side of the paper as the blue pawn?
Shown below is an image of multiple footwear items. How many complete pairs are there?
Shown below is a configuration of an isosceles triangle sliced into eight parts, each of the same height. While the first and last parts of the triangle remain fixed, the remaining parts have been displaced horizontally, by multiples of 0.5 cm. What is the area of the grey portion?
Top CEED Product Design and Development Questions
- A bank needs to upgrade its ATM kiosks to be wheel-chair accessible. An ATM kiosk entrance has four steps rising up to reach the floor level of the kiosk. Each step is 1000 mm in length, 300 mm in breadth, and 150 mm in height. The bank proposes to create a wheel-chair accessible ramp with a slope of 1:12, adjacent to the steps. What is the minimum horizontal length of the ramp in metre? \
- Figure shows the plan of a one-way road passing next to a primary school. Which of the options can be the location(s) to set up a bus stop for the school bus in Indian context?
- A folding fan shown in the image is made of bamboo and paper painted on one side. Which option is the closest representation of the same fan in the folded position? (dotted lines indicate the folds)
- Biomimicry is the practice of looking to nature for inspiration to solve design problems. Shown below are plants and animals (top row) that have inspired the design of products (bottom row). Which of the options listed below correctly identifies the plant and/or animal with the product that it inspired?
- Image on the left shows a cylinder kept on the top of a cube. Height of the cylinder and side of the cube are equal. Parallel rays of light are falling on them at an angle of 45 degree. Which option shows the correct shadow?
Top CEED Questions
The words given below are written using a particular font. Identify the digit that does not belong to the same font.
Shown below is a cross-section which is revolved 270 degrees around the P-Q axis to create a solid. How many surfaces will the resultant solid have?
Shown below is a strip of paper which is folded multiple times. How many red pawns are placed on the same side of the paper as the blue pawn?
Shown below is an image of multiple footwear items. How many complete pairs are there?
Shown below is a configuration of an isosceles triangle sliced into eight parts, each of the same height. While the first and last parts of the triangle remain fixed, the remaining parts have been displaced horizontally, by multiples of 0.5 cm. What is the area of the grey portion?