Question:
Power factor of a power transformer on no load will be about:
Power factor of a power transformer on no load will be about:
Show Hint
For a transformer on no load, the power factor is low (about 0.35) due to the magnetizing current being largely reactive. As load increases, the power factor improves.
Updated On: Feb 27, 2025
- 1
- 0.75
- 0.5
- 0.35
Show Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
When a transformer is on no load, the only current flowing is the magnetizing current, which is necessary to establish the magnetic flux in the core. This current is predominantly out of phase with the voltage and is much smaller compared to the current under full load. The magnetizing current is mostly reactive, resulting in a low power factor.
The power factor on no-load conditions is generally around 0.35, as the magnetizing current is primarily inductive. As the load increases, the power factor improves and approaches 1.
Was this answer helpful?
0
0
Top TANCET Electrical Engineering Questions
- The resultant magnetic flux generated in the closed surface will be
The motion of electrons in a CRT is due to:
- H in the region \( 0 \leq l \leq a \) for an infinitely long co-axial transmission line is:
The direction of current flow in the circuit is such that the induced magnetic field produced by the induced current will oppose the original magnetic field. This is:
The electromagnetic wave propagates in free space with a speed of:
View More Questions
Top TANCET Electric circuits and fields Questions
The motion of electrons in a CRT is due to:
Energy stored in the capacitor is:
- Which of the following motors is expected to have maximum full-load efficiency?
- Dynamic braking is very effective for:
A transformer steps up the voltage by a factor of 100. The ratio of current in the primary to that in the secondary is:
Top TANCET Questions
- If \( A \) is a \( 3 \times 3 \) matrix and the determinant of \( A \) is 6, then find the value of the determinant of the matrix \( (2A)^{-1} \):
- If the system of equations: \[ 3x + 2y + z = 0, \quad x + 4y + z = 0, \quad 2x + y + 4z = 0 \] is given, then:
- Let \[ M = \begin{bmatrix} 1 & 1 & 1 \\ 0 & 1 & 1 \\ 0 & 0 & 1 \end{bmatrix} \] The maximum number of linearly independent eigenvectors of \( M \) is:
- The shortest and longest distance from the point \( (1,2,-1) \) to the sphere \( x^2 + y^2 + z^2 = 24 \) is:
- The solution of the given ordinary differential equation \( x \frac{d^2 y}{dx^2} + \frac{dy}{dx} = 0 \) is:
View More Questions