For the ideal opamp based circuit shown in the figure, the ratio \( \frac{V}{I} \) is
For the ideal opamp based circuit shown in the figure, the ratio \( \frac{V}{I} \) is
Show Hint
- $\left(\frac{R_2 + R_4}{R_1 + R_3}\right) R_1$
- $\left(\frac{R_2 + R_4}{R_1 + R_3}\right) R_3$
- $R_1 + R_3$
- $R_3 + R_4$
The Correct Option is A
Solution and Explanation
For an ideal opamp, the voltage at the non-inverting input (\(V_+\)) is equal to the voltage at the inverting input (\(V_-\)), i.e., \(V_+ = V_-\). Also, no current flows into the input terminals of the ideal opamp.
Step 2: Apply KCL at the inverting node.
Let the voltage at the inverting input be \(V_-\). The current \(I\) enters the inverting node. The current flowing through \(R_1\) is \(\frac{V - V_-}{R_1}\), and the current flowing through \(R_2\) is \(\frac{V_o - V_-}{R_2}\). According to KCL:
$$I + \frac{V - V_-}{R_1} + \frac{V_o - V_-}{R_2} = 0$$
Step 3: Express \(V_+\) in terms of \(V_o\).
The non-inverting input is connected to a voltage divider formed by \(R_3\) and \(R_4\):
$$V_+ = \frac{R_4}{R_3 + R_4} V_o$$
Step 4: Use the virtual short concept (\(V_+ = V_-\)).
$$V_- = \frac{R_4}{R_3 + R_4} V_o$$
Step 5: Substitute \(V_-\) in the KCL equation.
$$I + \frac{V - \frac{R_4}{R_3 + R_4} V_o}{R_1} + \frac{V_o - \frac{R_4}{R_3 + R_4} V_o}{R_2} = 0$$
$$I + \frac{V(R_3 + R_4) - R_4 V_o}{R_1(R_3 + R_4)} + \frac{V_o(R_3 + R_4) - R_4 V_o}{R_2(R_3 + R_4)} = 0$$
$$I + \frac{V(R_3 + R_4) - R_4 V_o}{R_1(R_3 + R_4)} + \frac{V_o R_3}{R_2(R_3 + R_4)} = 0$$
Multiply by \(R_1 R_2 (R_3 + R_4)\):
$$I R_1 R_2 (R_3 + R_4) + R_2 (V(R_3 + R_4) - R_4 V_o) + R_1 R_3 V_o = 0$$
$$I R_1 R_2 (R_3 + R_4) + V R_2 (R_3 + R_4) - V_o R_2 R_4 + V_o R_1 R_3 = 0$$
$$V R_2 (R_3 + R_4) + I R_1 R_2 (R_3 + R_4) = V_o (R_2 R_4 - R_1 R_3)$$
$$V_o = \frac{V R_2 (R_3 + R_4) + I R_1 R_2 (R_3 + R_4)}{R_2 R_4 - R_1 R_3}$$
Now substitute \(V_o\) back into \(V_- = \frac{R_4}{R_3 + R_4} V_o\):
$$V_- = \frac{R_4}{R_3 + R_4} \frac{V R_2 (R_3 + R_4) + I R_1 R_2 (R_3 + R_4)}{R_2 R_4 - R_1 R_3} = \frac{R_4 (V R_2 + I R_1 R_2)}{R_2 R_4 - R_1 R_3}$$
We also have \(V_- = V - IR_1\):
$$V - IR_1 = \frac{V R_2 R_4 + I R_1 R_2 R_4}{R_2 R_4 - R_1 R_3}$$
$$V(R_2 R_4 - R_1 R_3) - IR_1(R_2 R_4 - R_1 R_3) = V R_2 R_4 + I R_1 R_2 R_4$$
$$- V R_1 R_3 + I R_1^2 R_3 = 2 I R_1 R_2 R_4$$
$$\frac{V}{I} = \frac{R_1^2 R_3 + 2 R_1 R_2 R_4}{R_1 R_3} = R_1 + 2 \frac{R_2 R_4}{R_3}$$ (Still not matching)
Given the provided correct answer, there might be a simpler way or a specific configuration assumed. Let's reconsider the circuit with the virtual short \(V_+ = V_-\).
\(V_+ = \frac{R_4}{R_3+R_4} V_o\)
\(V_- = V - IR_1\)
\(V - IR_1 = \frac{R_4}{R_3+R_4} V_o\)
Also, the current through \(R_2\) is \(\frac{V_- - V_o}{R_2}\). By KCL at the inverting node:
\(I + \frac{V - V_-}{R_1} = \frac{V_- - V_o}{R_2}\)
\(I = \frac{V_- - V_o}{R_2} - \frac{V - V_-}{R_1}\)
\(I = V_- (\frac{1}{R_2} + \frac{1}{R_1}) - \frac{V_o}{R_2} - \frac{V}{R_1}\)
\(I = \frac{R_4}{R_3+R_4} V_o (\frac{R_1+R_2}{R_1 R_2}) - \frac{V_o}{R_2} - \frac{V}{R_1}\)
\(I + \frac{V}{R_1} = V_o (\frac{R_4 (R_1+R_2)}{R_1 R_2 (R_3+R_4)} - \frac{1}{R_2}) = V_o \frac{R_4 R_1 + R_4 R_2 - R_1 (R_3+R_4)}{R_1 R_2 (R_3+R_4)} = V_o \frac{R_4 R_2 - R_1 R_3}{R_1 R_2 (R_3+R_4)}\)
\(V_o = \frac{(I R_1 + V) R_1 R_2 (R_3+R_4)}{R_4 R_2 - R_1 R_3}\)
From \(V - IR_1 = \frac{R_4}{R_3+R_4} V_o\):
\(V - IR_1 = \frac{R_4}{R_3+R_4} \frac{(I R_1 + V) R_1 R_2 (R_3+R_4)}{R_4 R_2 - R_1 R_3} = \frac{R_4 (I R_1 + V) R_1 R_2}{R_4 R_2 - R_1 R_3}\)
\((V - IR_1)(R_4 R_2 - R_1 R_3) = R_4 (I R_1 + V) R_1 R_2\)
\(V R_4 R_2 - V R_1 R_3 - I R_1 R_4 R_2 + I R_1^2 R_3 = I R_1^2 R_4 R_2 + V R_1 R_4 R_2\)
\(V (R_4 R_2 - R_1 R_3 - R_1 R_4 R_2) = I (R_1 R_4 R_2 - R_1^2 R_3 + R_1^2 R_4 R_2)\)
\(\frac{V}{I} = \frac{R_1 R_4 R_2 - R_1^2 R_3 + R_1^2 R_4 R_2}{R_4 R_2 - R_1 R_3 - R_1 R_4 R_2}\)
Top GATE IN Signals and Systems Questions
- Let a continuous-time signal be \( x(t) = e^{j9t} + e^{j5t} \), where \( j = \sqrt{-1} \) and \( t \) is in seconds. The fundamental period of the magnitude of \( x(t) \), in seconds, is:
In the circuit shown, assume that the BJT in the circuit has very high \( \beta \) and \( V_{BE} = 0.7 \) V, and the Zener diode has \( V_Z = 4.7 \) V. The current \( I \) through the LED is ________ mA (rounded off to two decimal places).
A chopper amplifier shown in the figure is designed to process a biomedical signal \( v_{in}(t) \) to generate conditioned output \( v_{out}(t) \). The signals \( v_{in}(t) \) and \( v_{os}(t) \) are band limited to 50 Hz and 10 Hz, respectively. For the system to operate as a linear amplifier, choose the correct statement from the following options.
A 3-bit DAC is implemented using ideal opamp and switches as shown in the figure. Each of the switches gets closed when its corresponding digital input is at logic 1. For a digital input of 110, the resistance \( R_{in} \) seen from the reference source and the current \( I \), are
Let \( f(t) \) and \( g(t) \) represent continuous-time real-valued signals. If \( h(t) \) denotes the cross-correlation between \( f(t) \) and \( g(-t) \), its continuous-time Fourier transform \( H(j\omega) \) equals: Note: \( F(j\omega) \) and \( G(j\omega) \) denote the continuous-time Fourier transforms of \( f(t) \) and \( g(t) \), respectively.
Top GATE IN Analog Electronics Questions
In the circuit shown, assume that the BJT in the circuit has very high \( \beta \) and \( V_{BE} = 0.7 \) V, and the Zener diode has \( V_Z = 4.7 \) V. The current \( I \) through the LED is ________ mA (rounded off to two decimal places).
A chopper amplifier shown in the figure is designed to process a biomedical signal \( v_{in}(t) \) to generate conditioned output \( v_{out}(t) \). The signals \( v_{in}(t) \) and \( v_{os}(t) \) are band limited to 50 Hz and 10 Hz, respectively. For the system to operate as a linear amplifier, choose the correct statement from the following options.
A 3-bit DAC is implemented using ideal opamp and switches as shown in the figure. Each of the switches gets closed when its corresponding digital input is at logic 1. For a digital input of 110, the resistance \( R_{in} \) seen from the reference source and the current \( I \), are
In the circuit shown, assume that the BJT in the circuit has very high $\beta$ and $V_{BE} = 0.7$ V, and the Zener diode has $V_Z = 4.7$ V. The current $I$ through the LED is ________ mA (rounded off to two decimal places).
- An ideal operational amplifier has:
Top GATE IN Questions
Despite his initial hesitation, Rehman’s ____________ to contribute to the success of the project never wavered.
Select the most appropriate option to complete the above sentence.Bird : Nest :: Bee : __________
Select the correct option to complete the analogy.- If \( P e^x = Q e^{-x} \) for all real values of \( x \), which one of the following statements is true?
The paper as shown in the figure is folded to make a cube where each square corresponds to a particular face of the cube. Which one of the following options correctly represents the cube? Note: The figures shown are representative.
- Let \( p_1 \) and \( p_2 \) denote two arbitrary prime numbers. Which one of the following statements is correct for all values of \( p_1 \) and \( p_2 \)?