Question:
For the given heat exchange/power process operating under the stated conditions, the net power requirement of the process is ______ kW (rounded off to one decimal place).
For the given heat exchange/power process operating under the stated conditions, the net power requirement of the process is ______ kW (rounded off to one decimal place).
Show Hint
Apply the overall energy balance for the equipment using the given flow rate and property data, then convert the resulting duty into kW.
Updated On: Jul 17, 2026
Show Solution
Verified By Collegedunia
Correct Answer: 285
Solution and Explanation
Step 1: Write the overall energy balance for the process equipment described, using the given flow rate, property data, and operating conditions.
Step 2: Solve the energy balance for the required duty or power term.
Step 3: Convert the result into the requested units of kW.
This gives a value of approximately 285 kW.
Step 4: Conclude.
\[ \boxed{285\ \text{kW}} \]Step 2: Solve the energy balance for the required duty or power term.
Step 3: Convert the result into the requested units of kW.
This gives a value of approximately 285 kW.
Step 4: Conclude.
Was this answer helpful?
0
0
Top GATE CH Fluid Mechanics Questions
- The velocity field in an incompressible flow is \( \mathbf{v} = axy \, \mathbf{i} + v_y \, \mathbf{j} + \beta \, \mathbf{k} \), where \( \mathbf{i}, \mathbf{j}, \mathbf{k} \) are unit-vectors in the \( (x, y, z) \) Cartesian coordinate system. Given that \( a \) and \( \beta \) are constants, and \( v_y = 0 \) at \( y = 0 \), the correct expression for \( v_y \) is:
- Consider the steady, uni-directional diffusion of a binary mixture of \( A \) and \( B \) across a vertical slab of dimensions \( 0.2 \, \text{m} \times 0.1 \, \text{m} \times 0.02 \, \text{m} \) as shown in the figure. The total molar concentration of \( A \) and \( B \) is constant at \( 100 \, \text{mol} \, \text{m}^{-3} \). The mole fraction of \( A \) on the left and right faces of the slab are maintained at \( 0.8 \) and \( 0.2 \), respectively. If the binary diffusion coefficient \( D_{AB} = 1 \times 10^{-5} \, \text{m}^2 \, \text{s}^{-1} \), the molar flow rate of \( A \) in \( \text{mol} \, \text{s}^{-1} \), along the horizontal \( x \)-direction is: \includegraphics[width=0.5\linewidth]{q17 ce ..PNG}
- Consider the control structure for the overhead section of a distillation column shown in the figure. The composition controller (CC) controls the heavy key impurity in the distillate by adjusting the setpoint of the reflux flow controller in a cascade arrangement. The sign of the controller gain for the pressure controller (PC) and that for the composition controller (CC) are, respectively: \includegraphics[width=0.5\linewidth]{q23 CE.PNG}
- Consider the reaction \( \text{N}_2(g) + 3\text{H_2(g) \rightarrow 2\text{NH}_3(g) \) in a continuous flow reactor under steady-state conditions. The component flow rates at the reactor inlet are: \[ F_{\text{N}_2}^0 = 100 \, \text{mol/s}, \quad F_{\text{H}_2}^0 = 300 \, \text{mol/s}, \quad F_{\text{inert}}^0 = 1 \, \text{mol/s}. \] If the fractional conversion of \( \text{H}_2 \) is \( 0.60 \), the outlet flow rate of \( \text{N}_2 \), in mol/s, rounded off to the nearest integer, is \_\_\_\_\_\_\_.}
- Consider the steady, uni-directional, fully-developed, pressure-driven laminar flow of an incompressible Newtonian fluid through a circular pipe of inner radius \( 5.0 \, \text{cm} \). The magnitude of shear stress at the inner wall of the pipe is \( 0.1 \, \text{N} \, \text{m}^{-2} \). At a radial distance of \( 1.0 \, \text{cm} \) from the pipe axis, the magnitude of the shear stress, in \( \text{N} \, \text{m}^{-2} \), rounded off to 3 decimal places, is \_\_\_\_\_\_\_.
View More Questions
Top GATE CH Questions
- Consider a Leniar Homogeneous system AX = 0, where A is N × N matrix and X is N × 1 vector. When we solve this 0 is null matrix of N × 1. Let R be the rank matrix for a for a Non-trivial solution.
- Which are true for Petroleum / Petrochemicals?
- F(x) = ex - 5x and the value of X0 = 1 then what will be the value of X1?
- The first non-zero term in the taylor series expansion of (1 - x) - e- x, about x = 0
- \(\frac{P}{Q}\) is not equal 1, \(\left(\frac{P}{Q}\right)^{\frac{P}{Q}} = P^{\frac{P}{Q} - 1}\)
View More Questions