Question:

Directions: The 3-D problem figure shows the view of an object. Identify the correct top view from amongst the answer figures.

Show Hint

Locate the tall wedge-shaped block at the far end, the long raised block across the middle and the notch in the front of the base; the tall block must start about one third of the way in from the left edge.
Updated On: Nov 16, 2026
Show Solution
collegedunia
Verified By Collegedunia

The Correct Option is A

Solution and Explanation

Orient the plan so that the long direction of the object (front-left to back-right in the 3-D figure) runs vertically and the near end is at the bottom.
Near end: a low block with a flat top and a sloping part, so in plan it shows two squares side by side at the bottom. The front of the base is narrower than the rest, so the outline has a rectangular notch at the lower right.
Behind it comes a stepped portion that gives a plain band, and then a long raised block lying across the full width, which gives a full-width band.
At the far end there is a tall block with a sloping face. Its top is narrow and starts about one third of the way across from the left edge, so the left part of the top of the plan is empty (the outline starts lower down on the left). The sloping face runs from the tall block down to the right edge and stops a little short of the far end of the tall block, which gives the small step at the top right.
Option (1) is the only plan in which the far-end block is narrow and set in from the left, with the notch and two bottom squares; options (2), (3) and (4) all show a wide block flush with the left edge at the top, which does not exist in the object.
Answer: (1) the plan with a narrow tall block set in from the left at the top and two squares at the bottom
Was this answer helpful?
0
0