Question:
Details of activities of a project are given as
The time required, in days, to complete the project along the critical path is (in integer).
Details of activities of a project are given as
The time required, in days, to complete the project along the critical path is (in integer).
Show Hint
The critical path determines the shortest time to complete a project. If any activity on the critical path is delayed, the entire project is delayed.
Updated On: Sep 4, 2025
Show Solution
Verified By Collegedunia
Solution and Explanation
- The critical path method is used to determine the longest path through the project network, which defines the minimum time required to complete the project.
- By calculating the total duration of each path from the start to the end, we identify the critical path as the one with the maximum total duration.
- After analyzing the network of activities and dependencies, the critical path for the given project involves the activities with durations totaling 43 days.
- By calculating the total duration of each path from the start to the end, we identify the critical path as the one with the maximum total duration.
- After analyzing the network of activities and dependencies, the critical path for the given project involves the activities with durations totaling 43 days.
Was this answer helpful?
0
0
Top GATE PI Production and Industrial Engineering Questions
- Atomic packing factor of a body centered cubic structure is closest to:
- Which one of the following statements is FALSE with respect to the injection molding of polymer composite?
- A through hole of 8 mm diameter is to be drilled in a 30 mm thick mild steel plate. Which one of the following processes is the most appropriate to achieve high dimensional accuracy with less processing time?
Match the following with reference to the CNC machine and its minimum number of axes available in the machine.
- The relationship between the hoop stress \( \sigma_1 \) and the longitudinal stress \( \sigma_2 \) of a closed cylindrical thin-walled pressure vessel is:
View More Questions
Top GATE PI Industrial and Production Questions
- Atomic packing factor of a body centered cubic structure is closest to:
- Which one of the following statements is FALSE with respect to the injection molding of polymer composite?
- A through hole of 8 mm diameter is to be drilled in a 30 mm thick mild steel plate. Which one of the following processes is the most appropriate to achieve high dimensional accuracy with less processing time?
Match the following with reference to the CNC machine and its minimum number of axes available in the machine.
- The relationship between the hoop stress \( \sigma_1 \) and the longitudinal stress \( \sigma_2 \) of a closed cylindrical thin-walled pressure vessel is:
View More Questions
Top GATE PI Questions
- In an air-standard Otto cycle, the pressure and temperature of air just before the compression stroke are 200 kPa and 26.85 °C, respectively. The combustion process is assumed to be a constant volume process, where 1.02 MJ/kg heat is added. The cycle efficiency is 50%. The adiabatic index \(γ\) and specific heat at constant volume \(C_v\) can be considered to be constant during the process (corresponding values taken at the mean cycle temperature).
Assuming that the ideal gas law is applicable, \(γ = \frac 43\) and \(c_v= 0.85\ kJ/kg-K\), the maximum pressure (in MPa) reached during the cycle is _____ . (Rounded off to 1 decimal place) - A metallic cylindrical pressure vessel, used to store compressed air in a plant, has 1 m mean radius and 4 mm wall thickness. The maximum allowable normal and shear stresses in the cylindrical portion of the vessel are 100 MPa and 40 MPa, respectively. Considering only these data in the design, the maximum allowable internal gauge pressure (in MPa) of the compressed air is ______ . (Rounded off to 2 decimal places)
- A flat belt drive with pulley of r = 20 cm radius is designed to transmit 6.283 kW power at 600 RPM. In the figure, τ is the corresponding torque. If the coefficient of static friction between the belt and the pulley is 0.3, then the minimum value of the tightening force F (in kN) required to prevent the belt slip is _____ . (Rounded off 2 decimal places)
- Mild steel plates are welded to make butt joints by arc welding with 85% heat transfer efficiency ignoring other losses. The first weld joint is made by selecting arc voltage of 30 V and current of 180 A with a welding speed of 6 mm/s. Using identical plates, a second weld joint is made with the same arc voltage and a welding speed of 8 mm/s. If both the welds have the same heat input, then the welding current (in A) for the second weld joint is _____. (Answer in integer)
- In a single pass cold rolling operation, a flat plate is reduced to a thickness of 3 mm. In this operation, two rolls of diameter 400 mm each are rotating in opposite direction at 300 RPM, and the elastic deflection of these rolls is negligible. The angle of bite is 10°. If the neutral point is present at an angle of 7° from the exit side, then the thickness of the plate (in mm) at the neutral point is _____ . (Rounded off to 1 decimal place)
View More Questions