Question:
Consider the block diagram in the figure with control input u, disturbance d and output y. For the feedforward controller, the ordered pair (K, a/ẞ) is
Consider the block diagram in the figure with control input u, disturbance d and output y. For the feedforward controller, the ordered pair (K, a/ẞ) is
Updated On: Jul 17, 2024
- (0.5, 2)
- (-0.5, 0.5)
- (-2, 2)
- (2, 0.5)
Show Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The correct option is (B) :(-0.5, 0.5)
Was this answer helpful?
0
0
Top GATE CH Instrumentation and Process Control Questions
- Consider the control structure for the overhead section of a distillation column shown in the figure. The composition controller (CC) controls the heavy key impurity in the distillate by adjusting the setpoint of the reflux flow controller in a cascade arrangement. The sign of the controller gain for the pressure controller (PC) and that for the composition controller (CC) are, respectively,
- For the block diagram shown in the figure, the correct expression for the transfer function \( G_d = \frac{y_1(s)}{d(s)} \) is:
- Consider the surge drum in the figure. Initially, the system is at steady state with a hold-up \( V = 5 \) m³, which is 50% of the full tank capacity, \( V_{\text{full}} \), and volumetric flow rates \( \vec{F}_{\text{in}} = \vec{F}_{\text{out}} = 1 \) m³/h. The high hold-up alarm limit \( V_{\text{high}} = 0.8 V_{\text{full}} \) while the low hold-up alarm limit \( V_{\text{low}} = 0.2 V_{\text{full}} \). A proportional (P-only) controller manipulates the outflow to regulate the hold-up \( V \) as \( \vec{F}_{\text{out}} = K_c (V - \vec{V}) + \vec{F}_{\text{out}} \). At \( t = 0 \), \( \vec{F}_{\text{in}} \) increases as a step from 1 m³/h to 2 m³/h. Assume linear control valves and instantaneous valve dynamics. Let \( K_c^{\text{min}} \) be the minimum controller gain that ensures \( V \) never exceeds \( V_{\text{high}} \). The value of \( K_c^{\text{min}} \), in h\(^{-1}\), rounded off to 2 decimal places, is _____.
- A PD controller with transfer function \( G_c \) is used to stabilize an open-loop unstable process with transfer function \( G_p \), where \( G_c = K_c \frac{(T_D s + 1)}{(\frac{T_D}{20})s + 1} \) and \( G_p = \frac{1}{(s - 1)(10s + 1)} \), and time is in minutes. From the necessary conditions for closed-loop stability, the maximum feasible value of \( T_D \), in minutes, rounded off to 1 decimal place, is _____.
- Consider the block diagram in the figure with control input \( u \), disturbance \( d \), and output \( y \). For the feedforward controller, the ordered pair \( (K, \alpha / \beta) \) is: \includegraphics[width=0.5\linewidth]{q22 CE.PNG}
View More Questions
Top GATE CH Measurement of process variables Questions
- Consider the surge drum in the figure. Initially, the system is at steady state with a hold-up \( V = 5 \) m³, which is 50% of the full tank capacity, \( V_{\text{full}} \), and volumetric flow rates \( \vec{F}_{\text{in}} = \vec{F}_{\text{out}} = 1 \) m³/h. The high hold-up alarm limit \( V_{\text{high}} = 0.8 V_{\text{full}} \) while the low hold-up alarm limit \( V_{\text{low}} = 0.2 V_{\text{full}} \). A proportional (P-only) controller manipulates the outflow to regulate the hold-up \( V \) as \( \vec{F}_{\text{out}} = K_c (V - \vec{V}) + \vec{F}_{\text{out}} \). At \( t = 0 \), \( \vec{F}_{\text{in}} \) increases as a step from 1 m³/h to 2 m³/h. Assume linear control valves and instantaneous valve dynamics. Let \( K_c^{\text{min}} \) be the minimum controller gain that ensures \( V \) never exceeds \( V_{\text{high}} \). The value of \( K_c^{\text{min}} \), in h\(^{-1}\), rounded off to 2 decimal places, is _____.
- A PD controller with transfer function \( G_c \) is used to stabilize an open-loop unstable process with transfer function \( G_p \), where \( G_c = K_c \frac{(T_D s + 1)}{(\frac{T_D}{20})s + 1} \) and \( G_p = \frac{1}{(s - 1)(10s + 1)} \), and time is in minutes. From the necessary conditions for closed-loop stability, the maximum feasible value of \( T_D \), in minutes, rounded off to 1 decimal place, is _____.
- Which of the following is NOT a standard to transmit measurement and control signals?
Choose the option that correctly pairs the given measurement devices with the quantities they measure.
\[ \begin{array}{c c c c} \underline{S\ No} & \underline{\text{Measurement Device}} & \underline{S\ No} & \underline{\text{Measured Quantity}} \\ \text{I} & \text{Bourdon Gauge} & \text{A} & \text{Temperature} \\ \text{II} & \text{Orifice Plate meter} & \text{B} & \text{Concentration} \\ \text{III} & \text{Pyrometer} & \text{C} & \text{Pressure} \\ \text{IV} & \text{Colorimeter} & \text{D} & \text{Flow rate} \\ \text{V} & \text{Pirani Gauge} & \text{E} & \text{Liquid level} \\ \end{array} \]
Top GATE CH Questions
- Consider a Leniar Homogeneous system AX = 0, where A is N × N matrix and X is N × 1 vector. When we solve this 0 is null matrix of N × 1. Let R be the rank matrix for a for a Non-trivial solution.
- Which are true for Petroleum / Petrochemicals?
- F(x) = ex - 5x and the value of X0 = 1 then what will be the value of X1?
- The first non-zero term in the taylor series expansion of (1 - x) - e- x, about x = 0
- \(\frac{P}{Q}\) is not equal 1, \(\left(\frac{P}{Q}\right)^{\frac{P}{Q}} = P^{\frac{P}{Q} - 1}\)
View More Questions